On Wed, Dec 14, 2016 at 3:02 PM, Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
> On Fri, Dec 9, 2016 at 1:36 PM, Ulrich Hecht
> <ulrich.hecht+renesas@xxxxxxxxx> wrote:
>> Implements support for FIFO fill thresholds greater than one with software
>> timeout.
>>
>> This mechanism is not possible (or at least not useful) on SCIF family
>> hardware other than SCIFA and SCIFB because they do not support turning off
>> the DR hardware timeout interrupt separately from the RI interrupt.
>
> What about HSCIF? Your code does handle HSCIF (cfr. HSRTRGR below)?
Same as the other non-A/B SCIFs.
>> --- a/drivers/tty/serial/sh-sci.c
>> +++ b/drivers/tty/serial/sh-sci.c
>
>> @@ -1159,6 +1162,24 @@ static int scif_set_rtrg(struct uart_port *port, int rx_trig)
>> return rx_trig;
>> }
>>
>> +static int scif_rtrg_enabled(struct uart_port *port)
>> +{
>> + if (sci_getreg(port, HSRTRGR)->size)
>> + return serial_port_in(port, HSRTRGR) != 0;
>> + else
>> + return (serial_port_in(port, SCFCR) &
>> + (SCFCR_RTRG0 | SCFCR_RTRG1)) != 0;
>> +}
I implemented this to work with all SCIFs, but ATM it is only used in
the "SCIFA/B, software timeout" case.
CU
Uli
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
