On 2017/1/12 3:48, Jason Uy wrote:
> In the most common use case, the Synopsys DW UART driver does not
> set the set_termios callback function. This prevents UPSTAT_AUTOCTS
> from being set when the UART flag CRTSCTS is set. As a result, the
> driver will use software flow control as opposed to hardware flow
> control.
>
> To fix the problem, the set_termios callback function is set to the
> DW specific function. The logic to set UPSTAT_AUTOCTS is moved so
> that any clock error will not affect setting the hardware flow
> control.
>
> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
> Signed-off-by: Jason Uy <jason.uy@xxxxxxxxxxxx>
Reviewed-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
> ---
> drivers/tty/serial/8250/8250_dw.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index c89fafc..c89ae45 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -248,11 +248,11 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
> if (!ret)
> p->uartclk = rate;
>
> +out:
> p->status &= ~UPSTAT_AUTOCTS;
> if (termios->c_cflag & CRTSCTS)
> p->status |= UPSTAT_AUTOCTS;
>
> -out:
> serial8250_do_set_termios(p, termios, old);
> }
>
> @@ -326,13 +326,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
> p->serial_in = dw8250_serial_in32;
> data->uart_16550_compatible = true;
> }
> - p->set_termios = dw8250_set_termios;
> }
>
> /* Platforms with iDMA */
> if (platform_get_resource_byname(to_platform_device(p->dev),
> IORESOURCE_MEM, "lpss_priv")) {
> - p->set_termios = dw8250_set_termios;
> data->dma.rx_param = p->dev->parent;
> data->dma.tx_param = p->dev->parent;
> data->dma.fn = dw8250_idma_filter;
> @@ -414,6 +412,7 @@ static int dw8250_probe(struct platform_device *pdev)
> p->serial_in = dw8250_serial_in;
> p->serial_out = dw8250_serial_out;
> p->set_ldisc = dw8250_set_ldisc;
> + p->set_termios = dw8250_set_termios;
>
> p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
> if (!p->membase)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
