Re: [PATCH] tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 02, 2017 at 03:14:37PM +0100, Richard Genoud wrote:
> 2017-01-02 12:53 GMT+01:00 Alexandre Belloni
> <alexandre.belloni@xxxxxxxxxxxxxxxxxx>:
> > On 06/12/2016 at 13:05:33 +0100, Richard Genoud wrote :
> >> When using RS485 in half duplex, RX should be enabled when TX is
> >> finished, and stopped when TX starts.
> >>
> >> Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
> >> duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
> >> was used. So, collisions could happened.
> >>
> >> But disabling RX in atmel_start_tx() uncovered another bug:
> >> RX was enabled again in the wrong place (in atmel_tx_dma) instead of
> >> being enabled when TX is finished (in atmel_complete_tx_dma), so the
> >> transmission simply stopped.
> >>
> >> This bug was not triggered before commit 0058f0871efe7b01c6
> >> ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
> >> never disabled before.
> >>
> >> Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
> >>
> >> Cc: stable@xxxxxxxxxxxxxxx
> >> Reported-by: Gil Weber <webergil@xxxxxxxxx>
> >> Tested-by: Gil Weber <webergil@xxxxxxxxx>
> >> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
> >
> > Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> >
> Greg, could you take this patch in your tree ?

Yes, will do so, thanks.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux