On 06/12/2016 at 13:05:33 +0100, Richard Genoud wrote :
> When using RS485 in half duplex, RX should be enabled when TX is
> finished, and stopped when TX starts.
>
> Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
> duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
> was used. So, collisions could happened.
>
> But disabling RX in atmel_start_tx() uncovered another bug:
> RX was enabled again in the wrong place (in atmel_tx_dma) instead of
> being enabled when TX is finished (in atmel_complete_tx_dma), so the
> transmission simply stopped.
>
> This bug was not triggered before commit 0058f0871efe7b01c6
> ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
> never disabled before.
>
> Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Gil Weber <webergil@xxxxxxxxx>
> Tested-by: Gil Weber <webergil@xxxxxxxxx>
> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
