On Thursday 05 January 2017 02:00 AM, David Lechner wrote: > This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx/C66x. The Keystone2 processors do include the C66x DSP. But the SoCs being targeted with this patch are the ARM + DSP variants. Using 66AK2x is more appropriate. http://www.ti.com/lsds/ti/processors/dsp/c6000_dsp-arm/66ak2x/overview.page Also, DA8xx includes DA830 which is pin-compatible with AM17x. So you can shorten the list of supported processors to DA8xx/66AK2x. > These SoCs have standard 8250 registers plus some extra non-standard > registers. > > The UART will not function unless the non-standard Power and Emulation > Management Register (PWREMU_MGMT) is configured correctly. This is > currently handled in arch/arm/mach-davinci/serial.c for non-device-tree > boards. Making this part of the UART driver will allow UART to work on > device-tree boards as well and the mach code can eventually be removed. > > Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx> Looks good to me, apart from the minor change above. Acked-by: Sekhar Nori <nsekhar@xxxxxx> Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
