On Mon, Sep 12, 2016 at 05:22:58PM +0200, Nicolas Ferre wrote:
> Le 12/09/2016 à 15:34, Richard Genoud a écrit :
> > Since commit 18dfef9c7f87 ("serial: atmel: convert to irq handling
> > provided mctrl-gpio"), interrupts from GPIOs are not disabled any more
> > when the serial port is closed, leading to an oops when the one of the
> > input pin is toggled (CTS/DSR/DCD/RNG).
> >
> > This is only the case if those pins are used as GPIOs, i.e. declared
> > like that:
> > usart1: serial@f8020000 {
> > /* CTS and DTS will be handled by GPIO */
> > status = "okay";
> > rts-gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
> > cts-gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
> > dtr-gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
> > dsr-gpios = <&pioC 31 GPIO_ACTIVE_LOW>;
> > rng-gpios = <&pioB 12 GPIO_ACTIVE_LOW>;
> > dcd-gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
> > };
> >
> > That's because modem interrupts used to be freed in atmel_shutdown().
> > After commit 18dfef9c7f87 ("serial: atmel: convert to irq handling
> > provided mctrl-gpio"), this code was just removed.
> > Calling atmel_disable_ms() disables the interrupts and everything works
> > fine again.
> >
> > Tested on at91sam9g35-cm
> >
> > (This patch doesn't apply on -stable kernels, fixes for 4.4 and 4.7 will
> > be sent after this one is applied.)
> >
> > Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
> > Fixes: 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio")
>
> I thinks it's a bit late for "4.8-fixes".
>
> Greg, tell me if you want that I add the Cc: stable tag to this patch
> (as advised by Uwe) and re-send?
I'll add it, no worries.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
