The following patches will fix the Fintek LPC to UARTs IRQ mode mismatch issue, code refactoring and this series patches should follow by patch rename IRQ_MODE macro on 'commit 87a713c8ffca ("8250/fintek: rename IRQ_MODE macro")'. with tty-linus branch. Some BIOS only use _OSI("Linux") to distinguish between Linux & Windows. Apply Level/Low to UART trigger mode if Windows, Edge/High otherwise. But since 2.6.23 the mainline kernel no longer returns true for _OSI(“Linux”). The BIOS ASL should avoid to use _OSI() to check system type and use ACPI MADT override IRQ mode instead. We'll try to refactoring the source code more readable with SuperIO read/write register functions. Ricardo Ribalda Delgado suggest fixing a potential NULL pointer dereference with applied patch fix the mismatched IRQ mode on 'commit 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode")'. had been implemented with 8250_fintek: Set IRQ Mode when port probed. Ji-Ze Hong (Peter Hong) (7): serial: 8250_fintek: Refactoring read/write method serial: 8250_fintek: Set IRQ Mode when port probed serial: 8250_fintek: Set maximum FIFO of F81216H serial: 8250_fintek: Rearrange function serial: 8250_fintek: Add F81216 Support serial: 8250_fintek: Add F81866 Support serial: 8250_fintek: Add F81865 Support drivers/tty/serial/8250/8250_fintek.c | 233 +++++++++++++++++++++++++--------- 1 file changed, 175 insertions(+), 58 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html