Unify the check of em485 variable to be either (em485) or (!em485) instead of
the explicit comparison to NULL.
While here, remove redundant check in __do_stop_tx_rs485() and
__stop_tx_rs485() since the functions ain't called with NULL value of em485
variable.
Cc: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_port.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index bc7cd1a..875cd47 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -585,11 +585,11 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put);
*/
int serial8250_em485_init(struct uart_8250_port *p)
{
- if (p->em485 != NULL)
+ if (p->em485)
return 0;
p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_ATOMIC);
- if (p->em485 == NULL)
+ if (!p->em485)
return -ENOMEM;
setup_timer(&p->em485->stop_tx_timer,
@@ -619,7 +619,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_init);
*/
void serial8250_em485_destroy(struct uart_8250_port *p)
{
- if (p->em485 == NULL)
+ if (!p->em485)
return;
del_timer(&p->em485->start_tx_timer);
@@ -1402,10 +1402,8 @@ static void serial8250_stop_rx(struct uart_port *port)
static void __do_stop_tx_rs485(struct uart_8250_port *p)
{
- if (!p->em485)
- return;
-
serial8250_em485_rts_after_send(p);
+
/*
* Empty the RX FIFO, we are not interested in anything
* received during the half-duplex transmission.
@@ -1440,9 +1438,6 @@ static void __stop_tx_rs485(struct uart_8250_port *p)
{
struct uart_8250_em485 *em485 = p->em485;
- if (!em485)
- return;
-
/*
* __do_stop_tx_rs485 is going to set RTS according to config
* AND flush RX FIFO if required.
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
