From: Stefan Agner <stefan@xxxxxxxx>
Currently the tx_empty callback only considers the Transmit Complete
Flag (TC). The reference manual is not quite clear if the TC flag
covers the TX FIFO too. Debug prints on real hardware have shown that
from time to time the TC flag is asserted (indicating Transmitter
idle) while there are still data in the TX FIFO. Hence, in this case
the serial core will call the shutdown callback even though there are
data remaining in the TX FIFO buffers.
Avoid early shutdowns by considering the TX FIFO empty flag too. Also
avoid theoretical race conditions between DMA and the driver by
checking whether the TX DMA is in progress too.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 3d79003..fabfa7e 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -810,8 +810,18 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
/* return TIOCSER_TEMT when transmitter is not busy */
static unsigned int lpuart_tx_empty(struct uart_port *port)
{
- return (readb(port->membase + UARTSR1) & UARTSR1_TC) ?
- TIOCSER_TEMT : 0;
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ unsigned char sr1 = readb(port->membase + UARTSR1);
+ unsigned char sfifo = readb(port->membase + UARTSFIFO);
+
+ if (sport->dma_tx_in_progress)
+ return 0;
+
+ if (sr1 & UARTSR1_TC && sfifo & UARTSFIFO_TXEMPT)
+ return TIOCSER_TEMT;
+
+ return 0;
}
static unsigned int lpuart32_tx_empty(struct uart_port *port)
--
2.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
