Hi Alan,
One Thousand Gnomes 於 2016/1/28 下午 06:04 寫道:
+ Please bulit-in kernel if you need early console support.
This driver needs to be built into the kernel to use early console
support.
ok
+ switch (dev->device) {
+ case FINTEK_F81504: /* 4 ports */
+ /* F81504 max 2 sets of GPIO, others are max 6 sets*/
+ gpio_en &= 0x03;
+ case FINTEK_F81508: /* 8 ports */
+ max_port = dev->device & 0xff;
If that is meant to fall through from F81504 into F81508 it's worth
commenting, otherwise someone reviewing the code can't always be sure it
was intentional.
ok, I'll add comments to describe this.
+ /* Get the UART IO address dispatch from the BIOS */
+ pci_read_config_dword(dev, 0x24, &bar_data[0]);
+ pci_read_config_dword(dev, 0x20, &bar_data[1]);
+ pci_read_config_dword(dev, 0x1c, &bar_data[2]);
Take these from the pci device itself. On some non PC platforms the
values in the pci bar may be remapped by bridges and not give you the
true answer.
pci_resource_start(dev, barnumber)
Thanks for point this out, I'll rewrite here with pci_resource_start().
--
With Best Regards,
Peter Hung
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
