From: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
"earlyprintk" is architecture specific option.
General "earlycon" option support is much better.
Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
[uli: preserve other SCSCR bits when asserting RE and TE]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
[geert: rewording, #ifdef rework]
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
This depends on commit e1dd3bef6d03c908 ("serial: earlycon: Add missing
spinlock initialization"), which is now in v4.4-rc6.
I applies to tty-next with and without merging the pending pull request of
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git \
scif-clk-sck-brg-for-v4.5
---
drivers/tty/serial/Kconfig | 6 ++++
drivers/tty/serial/sh-sci.c | 77 ++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec4404062d8f19..5ff8c64304665903 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -742,6 +742,12 @@ config SERIAL_SH_SCI_CONSOLE
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
+config SERIAL_SH_SCI_EARLYCON
+ bool "Support for early console on SuperH SCI(F)"
+ depends on SERIAL_SH_SCI=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+
config SERIAL_SH_SCI_DMA
bool "DMA support"
depends on SERIAL_SH_SCI && DMA_ENGINE
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 960e50a97558cff5..b296d0783f72199d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -580,7 +580,8 @@ static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
}
}
-#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
#ifdef CONFIG_CONSOLE_POLL
static int sci_poll_get_char(struct uart_port *port)
@@ -621,7 +622,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
serial_port_out(port, SCxTDR, c);
sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
-#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
+ CONFIG_SERIAL_SH_SCI_EARLYCON */
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
@@ -2411,7 +2413,8 @@ static void sci_cleanup_single(struct sci_port *port)
pm_runtime_disable(port->port.dev);
}
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
static void serial_console_putchar(struct uart_port *port, int ch)
{
sci_poll_put_char(port, ch);
@@ -2431,9 +2434,12 @@ static void serial_console_write(struct console *co, const char *s,
int locked = 1;
local_irq_save(flags);
+#if defined(SUPPORT_SYSRQ)
if (port->sysrq)
locked = 0;
- else if (oops_in_progress)
+ else
+#endif
+ if (oops_in_progress)
locked = spin_trylock(&port->lock);
else
spin_lock(&port->lock);
@@ -2541,7 +2547,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
#define SCI_CONSOLE NULL
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE || CONFIG_SERIAL_SH_SCI_EARLYCON */
static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
@@ -2789,6 +2795,67 @@ static void __exit sci_exit(void)
early_platform_init_buffer("earlyprintk", &sci_driver,
early_serial_buf, ARRAY_SIZE(early_serial_buf));
#endif
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+static struct __init plat_sci_port port_cfg;
+
+static int __init early_console_setup(struct earlycon_device *device,
+ int type)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.serial_in = sci_serial_in;
+ device->port.serial_out = sci_serial_out;
+ device->port.type = type;
+ memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
+ sci_ports[0].cfg = &port_cfg;
+ sci_ports[0].cfg->type = type;
+ sci_probe_regmap(sci_ports[0].cfg);
+ port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR) |
+ SCSCR_RE | SCSCR_TE;
+ sci_serial_out(&sci_ports[0].port, SCSCR, port_cfg.scscr);
+
+ device->con->write = serial_console_write;
+ return 0;
+}
+static int __init sci_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCI);
+}
+static int __init scif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIF);
+}
+static int __init scifa_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFA);
+}
+static int __init scifb_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFB);
+}
+static int __init hscif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_HSCIF);
+}
+
+EARLYCON_DECLARE(sci, sci_early_console_setup);
+OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
+EARLYCON_DECLARE(scif, scif_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
+EARLYCON_DECLARE(scifa, scifa_early_console_setup);
+OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
+EARLYCON_DECLARE(scifb, scifb_early_console_setup);
+OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
+EARLYCON_DECLARE(hscif, hscif_early_console_setup);
+OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
+
module_init(sci_init);
module_exit(sci_exit);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
