From: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
In ACPI this device is only defined in SBSA mode so
if we are coming from ACPI use this mode.
Signed-off-by: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
Signed-off-by: Aleksey Makarov <aleksey.makarov@xxxxxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 899a771..974cb9e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
if (!uap)
return -ENOMEM;
- uap->clk = devm_clk_get(&dev->dev, NULL);
- if (IS_ERR(uap->clk))
- return PTR_ERR(uap->clk);
-
- uap->vendor = vendor;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
- uap->fifosize = vendor->get_fifosize(dev);
- uap->port.irq = dev->irq[0];
- uap->port.ops = &amba_pl011_pops;
+ /* ACPI only defines SBSA variant */
+ if (has_acpi_companion(&dev->dev)) {
+ /*
+ * According to ARM ARMH0011 is currently the only mapping
+ * of pl011 in ACPI and it's mapped to SBSA UART mode
+ */
+ uap->vendor = &vendor_sbsa;
+ uap->fifosize = 32;
+ uap->port.ops = &sbsa_uart_pops;
+ uap->fixed_baud = 115200;
- snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+ snprintf(uap->type, sizeof(uap->type), "SBSA");
+ } else {
+ uap->clk = devm_clk_get(&dev->dev, NULL);
+ if (IS_ERR(uap->clk))
+ return PTR_ERR(uap->clk);
+
+ uap->vendor = vendor;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fifosize = vendor->get_fifosize(dev);
+ uap->port.ops = &amba_pl011_pops;
+
+ snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
+ amba_rev(dev));
+ }
+ uap->port.irq = dev->irq[0];
ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
if (ret)
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
