Re: [PATCH v4 1/2] serial: rewrite pxa2xx-uart to use 8250_core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sergei Ianovich <ynvich@xxxxxxxxx> writes:

> On Sat, 2015-12-19 at 14:26 +0100, Robert Jarzmik wrote:
>> Robert Jarzmik <robert.jarzmik@xxxxxxx> writes:
>> 
>> > Sergei Ianovich <ynvich@xxxxxxxxx> writes:
>> > 
>> > > pxa2xx-uart was a separate uart platform driver. It was declaring
>> > > the same device names and numbers as 8250 driver. As a result,
>> > > it was impossible to use 8250 driver on PXA SoCs.
>> > > 
>> > > Upon closer examination pxa2xx-uart turned out to be a clone of
>> > > 8250_core driver.
>> > > 
>> > > Workaround for Erratum #19 according to Marvel(R) PXA270M
>> > > Processor
>> > > Specification Update (April 19, 2010) is dropped. 8250_core reads
>> > > from FIFO immediately after checking DR bit in LSR.
>> > > 
>> > > Signed-off-by: Sergei Ianovich <ynvich@xxxxxxxxx>
>> > > Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
>> > > Reviewed-by: James Cameron <quozl@xxxxxxxxxx>
>> > > Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> > Tested-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
>> 
>> Shrunk the list, the following is rather mach-pxa specific.
>> 
>> Actually there is a small glitch ...
>> Have a look at arch/arm/mach-pxa/viper.c, line 490:
>> 	#ifndef CONFIG_SERIAL_PXA
>> 	...
>
> Thanks for spotting this. This is caused by a change in the latest
> version of the patch (SERIAL_8250_PXA instead of SERIAL_PXA). This
> change could be reverted.
Actually I'm against the revert.
The name change looks very good to me, please keep it.

>> But that can be handled in an subsequent patch to keep your acks and
>> reviews.
> I will respin the patch. Please comment on the acks and reviews. They
> were made at an earlier version of the patch. That version no longer
> applies. Can the updated version carry on the flags?
I don't get you. If you mean keeping CONFIG_SERIAL_8250_PXA, then yes, please
keep it.

Cheers.
-- 
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux