Checkpatch complains about incorrect indentation of switch/case statements.
This patch fixes the corresponding warnings. Additionally some indentation
is changed to match the correct format specified in the Linux Kernel
Coding Style.
Signed-off-by: Anton Würfel <anton.wuerfel@xxxxxx>
Signed-off-by: Phillip Raffeck <phillip.raffeck@xxxxxx>
CC: linux-kernel@xxxxxxxxxxxx
---
drivers/tty/serial/8250/8250_pci.c | 31 +++++++++++++++----------------
drivers/tty/serial/8250/8250_pnp.c | 4 ++--
drivers/tty/serial/8250/8250_port.c | 14 +++++++-------
3 files changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index ed99fdf..41508a5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -722,7 +722,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
*/
pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]);
device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
- | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+ | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
writel(device_window, p + MITE_IOWBSR1);
/* Set window access to go to RAMSEL IO address space */
@@ -843,17 +843,16 @@ static int pci_netmos_init(struct pci_dev *dev)
return 0;
switch (dev->device) { /* FALLTHROUGH on all */
- case PCI_DEVICE_ID_NETMOS_9904:
- case PCI_DEVICE_ID_NETMOS_9912:
- case PCI_DEVICE_ID_NETMOS_9922:
- case PCI_DEVICE_ID_NETMOS_9900:
- num_serial = pci_netmos_9900_numports(dev);
- break;
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
- default:
- if (num_serial == 0 ) {
- moan_device("unknown NetMos/Mostech device", dev);
- }
+ default:
+ if (num_serial == 0)
+ moan_device("unknown NetMos/Mostech device", dev);
}
if (num_serial == 0)
@@ -1766,7 +1765,7 @@ xr17v35x_has_slave(struct serial_private *priv)
const int dev_id = priv->dev->device;
return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
- (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+ (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
}
static int
@@ -1866,8 +1865,8 @@ pci_fastcom335_setup(struct serial_private *priv,
static int
pci_wch_ch353_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16550A;
@@ -1876,8 +1875,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
static int
pci_wch_ch38x_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16850;
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 658b392..1f18065 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -425,8 +425,8 @@ static int check_resources(struct pnp_dev *dev)
static int serial_pnp_guess_board(struct pnp_dev *dev)
{
if (!(check_name(pnp_dev_name(dev)) ||
- (dev->card && check_name(dev->card->name))))
- return -ENODEV;
+ (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
if (check_resources(dev))
return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index ae8f993..57ad0f2 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -52,7 +52,7 @@
#define DEBUG_AUTOCONF(fmt...) do { } while (0)
#endif
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
* Here we define the default xmit fifo size used for each type of UART.
@@ -2236,9 +2236,9 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_port_out(port, 0x2, quot_frac);
}
-static unsigned int
-serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static unsigned int serial8250_get_baud_rate(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int tolerance = port->uartclk / 100;
@@ -2253,9 +2253,9 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
(port->uartclk + tolerance) / 16);
}
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void serial8250_do_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char cval;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
