On Thu, Nov 5, 2015 at 10:27 AM, Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> wrote: > On Thu, Nov 05, 2015 at 09:28:23AM +0100, Linus Walleij wrote: >> On Tue, Nov 3, 2015 at 3:51 PM, Russell King >> <rmk+kernel@xxxxxxxxxxxxxxxx> wrote: >> >> > Add (incomplete) support for the ZTE UART to the AMBA PL011 driver. >> > This is similar to the ARM and ST variants, except it has a different >> > register address layout, and requires 32-bit accesses to the registers. >> > Use the newly introduced register tables and access size support to >> > cope with these differences. >> > >> > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> >> >> I applied the whole series, 1-11 and tested on Ux500 (ST Micro variant) >> and on the ARM RealView PB11MPCore. >> >> It works like a charm. I also like the looks of this transformation. >> Tested-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > > As I mentioned, the change in pl011_putc() needs undoing (I've already > modified that in my series). Also, I'll try switching to the relaxed > accessors and checking that. Thanks for the tested-by though, can I > assume that you're happy I add that even with the pl011_putc() change > undone? Sure. I'm pretty sure that doesn't change much. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
