Add (incomplete) support for the ZTE UART to the AMBA PL011 driver.
This is similar to the ARM and ST variants, except it has a different
register address layout, and requires 32-bit accesses to the registers.
Use the newly introduced register tables and access size support to
cope with these differences.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++++
include/linux/amba/serial.h | 18 ++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8f5f82039346..373b1520083f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -171,6 +171,29 @@ static struct vendor_data vendor_st = {
.get_fifosize = get_fifosize_st,
};
+static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
+ [REG_DR] = ZX_UART011_DR,
+ [REG_FR] = ZX_UART011_FR,
+ [REG_LCRH_RX] = ZX_UART011_LCRH,
+ [REG_LCRH_TX] = ZX_UART011_LCRH,
+ [REG_IBRD] = ZX_UART011_IBRD,
+ [REG_FBRD] = ZX_UART011_FBRD,
+ [REG_CR] = ZX_UART011_CR,
+ [REG_IFLS] = ZX_UART011_IFLS,
+ [REG_IMSC] = ZX_UART011_IMSC,
+ [REG_RIS] = ZX_UART011_RIS,
+ [REG_MIS] = ZX_UART011_MIS,
+ [REG_ICR] = ZX_UART011_ICR,
+ [REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static struct vendor_data vendor_zte = {
+ .reg_offset = pl011_zte_offsets,
+ .access_32b = true,
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .get_fifosize = get_fifosize_arm,
+};
+
/* Deals with DMA transactions */
struct pl011_sgbuf {
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 0ddb5c02ad8b..d76a19ba2cff 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -65,6 +65,24 @@
#define ST_UART011_ABCR 0x100 /* Autobaud control register. */
#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */
+/*
+ * ZTE UART register offsets. This UART has a radically different address
+ * allocation from the ARM and ST variants, so we list all registers here.
+ * We assume unlisted registers do not exist.
+ */
+#define ZX_UART011_DR 0x04
+#define ZX_UART011_FR 0x14
+#define ZX_UART011_IBRD 0x24
+#define ZX_UART011_FBRD 0x28
+#define ZX_UART011_LCRH 0x30
+#define ZX_UART011_CR 0x34
+#define ZX_UART011_IFLS 0x38
+#define ZX_UART011_IMSC 0x40
+#define ZX_UART011_RIS 0x44
+#define ZX_UART011_MIS 0x48
+#define ZX_UART011_ICR 0x4c
+#define ZX_UART011_DMACR 0x50
+
#define UART011_DR_OE (1 << 11)
#define UART011_DR_BE (1 << 10)
#define UART011_DR_PE (1 << 9)
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
