On Fri, Jul 17, 2015 at 03:30:18PM -0500, Shenwei Wang wrote:
> When system goes into low power states like SUSPEND_MEM and
> HIBERNATION, the hardware IP block may be powered off to reduce
> the power consumption. This power down may cause problems on
> some imx platforms, because the hardware settings are reset to
> its power on default values which may differ from the ones when
> it power off. This patch added the dev_pm_ops and implemented
> two callbacks: suspend_noirq and resume_noirq, which will save
> the necessory hardware parameters right before power down and
> recover them before system uses the hardware.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxxxxxxxx>
> ---
> drivers/tty/serial/imx.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index c8cfa06..acaaa68 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -216,6 +216,7 @@ struct imx_port {
> unsigned int tx_bytes;
> unsigned int dma_tx_nents;
> wait_queue_head_t dma_wait;
> + unsigned int saved_reg[10];
> };
>
> struct imx_port_ucrs {
> @@ -1986,6 +1987,58 @@ static int serial_imx_remove(struct platform_device *pdev)
> return uart_remove_one_port(&imx_reg, &sport->port);
> }
>
> +static int imx_serial_port_suspend_noirq(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct imx_port *sport = platform_get_drvdata(pdev);
> +
> + /* Save necessary regs */
> + clk_enable(sport->clk_ipg);
> + sport->saved_reg[0] = readl(sport->port.membase + UCR1);
> + sport->saved_reg[1] = readl(sport->port.membase + UCR2);
> + sport->saved_reg[2] = readl(sport->port.membase + UCR3);
> + sport->saved_reg[3] = readl(sport->port.membase + UCR4);
> + sport->saved_reg[4] = readl(sport->port.membase + UFCR);
> + sport->saved_reg[5] = readl(sport->port.membase + UESC);
> + sport->saved_reg[6] = readl(sport->port.membase + UTIM);
> + sport->saved_reg[7] = readl(sport->port.membase + UBIR);
> + sport->saved_reg[8] = readl(sport->port.membase + UBMR);
> + sport->saved_reg[9] = readl(sport->port.membase + IMX21_UTS);
> + clk_disable(sport->clk_ipg);
> +
> + pr_debug("0x%p (%d)\r\n", sport->port.membase, sport->port.line);
You have a struct device, please use dev_dbg() instead.
> +
> + return 0;
> +}
> +
> +static int imx_serial_port_resume_noirq(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct imx_port *sport = platform_get_drvdata(pdev);
> +
> + clk_enable(sport->clk_ipg);
> + writel(sport->saved_reg[4], sport->port.membase + UFCR);
> + writel(sport->saved_reg[5], sport->port.membase + UESC);
> + writel(sport->saved_reg[6], sport->port.membase + UTIM);
> + writel(sport->saved_reg[7], sport->port.membase + UBIR);
> + writel(sport->saved_reg[8], sport->port.membase + UBMR);
> + writel(sport->saved_reg[9], sport->port.membase + IMX21_UTS);
> + writel(sport->saved_reg[0], sport->port.membase + UCR1);
> + writel(sport->saved_reg[1] | 0x1, sport->port.membase + UCR2);
> + writel(sport->saved_reg[2], sport->port.membase + UCR3);
> + writel(sport->saved_reg[3], sport->port.membase + UCR4);
> + clk_disable(sport->clk_ipg);
> +
> + pr_debug("0x%p (%d)\r\n", sport->port.membase, sport->port.line);
Same here, please use dev_dbg()
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
