[PATCH v2 02/10] drivers: PL011: refactor pl011_startup()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Split the pl011_startup() function into smaller chunks to allow
easier reuse later when adding SBSA support.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 drivers/tty/serial/amba-pl011.c |   48 +++++++++++++++++++++++----------------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 961f9b0..db2f90e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1654,6 +1654,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
 	}
 }
 
+static int pl011_allocate_irq(struct uart_amba_port *uap)
+{
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+
+	return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+}
+
+/*
+ * Enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
+ */
+static void pl011_enable_interrupts(struct uart_amba_port *uap)
+{
+	spin_lock_irq(&uap->port.lock);
+
+	/* Clear out any spuriously appearing RX interrupts */
+	writew(UART011_RTIS | UART011_RXIS,
+		uap->port.membase + UART011_ICR);
+	uap->im = UART011_RTIM;
+	if (!pl011_dma_rx_running(uap))
+		uap->im |= UART011_RXIM;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	spin_unlock_irq(&uap->port.lock);
+}
+
 static int pl011_startup(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1665,12 +1691,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-
-	/*
-	 * Allocate the IRQ
-	 */
-	retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+	retval = pl011_allocate_irq(uap);
 	if (retval)
 		goto clk_dis;
 
@@ -1693,20 +1714,7 @@ static int pl011_startup(struct uart_port *port)
 	/* Startup DMA */
 	pl011_dma_startup(uap);
 
-	/*
-	 * Finally, enable interrupts, only timeouts when using DMA
-	 * if initial RX DMA job failed, start in interrupt mode
-	 * as well.
-	 */
-	spin_lock_irq(&uap->port.lock);
-	/* Clear out any spuriously appearing RX interrupts */
-	 writew(UART011_RTIS | UART011_RXIS,
-		uap->port.membase + UART011_ICR);
-	uap->im = UART011_RTIM;
-	if (!pl011_dma_rx_running(uap))
-		uap->im |= UART011_RXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	pl011_enable_interrupts(uap);
 
 	return 0;
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux