The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a
N multiplier factor that starts from 1, not 0.
This patch adds an option to the clock driver's config data structures
to define the difference.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/clk/sunxi/clk-factors.c | 5 ++++-
drivers/clk/sunxi/clk-factors.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 3806d97..399cf4d 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -62,7 +62,10 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
p = FACTOR_GET(config->pshift, config->pwidth, reg);
/* Calculate the rate */
- rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ if (config->n_from_one)
+ rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
+ else
+ rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
return rate;
}
diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
index 02e1a43..0484a48 100644
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -15,6 +15,7 @@ struct clk_factors_config {
u8 mwidth;
u8 pshift;
u8 pwidth;
+ u8 n_from_one;
};
struct clk_factors {
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
