On Tue, Apr 29, 2014 at 03:44:46PM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> On Monday 28 April 2014 16:07:49 Simon Horman wrote:
> > On Mon, Apr 28, 2014 at 10:13:55AM +0900, Simon Horman wrote:
> > > On Mon, Apr 28, 2014 at 02:08:16AM +0200, Laurent Pinchart wrote:
> > > > On Monday 28 April 2014 09:03:14 Simon Horman wrote:
> > > > > On Fri, Apr 25, 2014 at 09:11:06AM +0200, Geert Uytterhoeven wrote:
> > > > > > On Fri, Apr 25, 2014 at 9:05 AM, Laurent Pinchart wrote:
> > > > > > >> + scif0: serial@ffe40000 {
> > > > > > >> + compatible = "renesas,scif",
> > > > > > >> "renesas,scif-r8a7779";
> > > > > > >> + reg = <0xffe40000 265>;
> > > > > > >> + interrupt-parent = <&gic>;
> > > > > > >> + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
> > > > > > >> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > > > > > >> + clock-names = "sci_ick";
> > > > > > >
> > > > > > > Clock handling in the sh-sci driver should probably be improved.
> > > > > > > The driver currently requires an "sci_ick" interface clock and
> > > > > > > supports an optional "sci_fck" functional clock. In practice, as
> > > > > > > far as I can see, platforms that provide both sci_ick and sci_fck
> > > > > > > set the two clocks to the same source.
> > > > > >
> > > > > > That's right. As a consequence, the clock's enable count is
> > > > > > incremented
> > > > > >
> > > > > > 3 times:
> > > > > > - once for fck,
> > > > > > - once for ick,
> > > > > > - once for generic Runtime PM using the "NULL" clock.
> > > > >
> > > > > This approach is fine by me.
> > > > > But I think you need to maintain compatibility with the old
> > > > > binding ("sci_ick" required, "sci_fsk") as it seems that
> > > > > was included in v3.14.
> > > >
> > > > sci_fck isn't part of the DT bindings, so we can at least drop that one.
> > >
> > > So long as its not used anywhere in-tree, which I believe is the case,
> > > then that is fine by me.
> >
> > BTW, are you planning to make the above mentioned driver update
> > before or after re-posting enablement patches for Koelsch and/or Lager?
> > I ask because I would like to make such patches the basis for
> > a patch for Marzen.
>
> I'll try to do so today, after my talk at the ELC :-)
I thought you might be a bit busy with ELC so I went
ahead and made my Marzen patches. Hopefully they aren't
too far away from what you have in mind for the Koelsch and Lager.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
