From: Qipan Li <Qipan.Li@xxxxxxx>
instead of using sirf specific dma channel property like "sirf,uart-dma-rx-channel"
and "sirf,uart-dma-tx-channel", here we move to use generic dma dt-binding to get
the channel like:
- sirf,uart-dma-rx-channel = <21>;
- sirf,uart-dma-tx-channel = <2>;
+ dmas = <&dmac1 5>, <&dmac0 2>;
+ dma-names = "rx", "tx";
and we move dma_request_channel() to dma_request_slave_channel(), we don't need to
call sirfsoc dma filter function sirfsoc_dma_filter_id() again.
Signed-off-by: Qipan Li <Qipan.Li@xxxxxxx>
Signed-off-by: Barry Song <Baohua.Song@xxxxxxx>
---
arch/arm/boot/dts/atlas6.dtsi | 17 ++--
arch/arm/boot/dts/prima2.dtsi | 20 ++--
drivers/tty/serial/sirfsoc_uart.c | 195 ++++++++++++-------------------------
drivers/tty/serial/sirfsoc_uart.h | 5 -
4 files changed, 81 insertions(+), 156 deletions(-)
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index f8674bc..0c81dc9 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -217,8 +217,8 @@
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
- sirf,uart-dma-rx-channel = <21>;
- sirf,uart-dma-tx-channel = <2>;
+ dmas = <&dmac1 5>, <&dmac0 2>;
+ dma-names = "rx", "tx";
};
uart1: uart@b0060000 {
@@ -228,6 +228,7 @@
interrupts = <18>;
fifosize = <32>;
clocks = <&clks 14>;
+ dma-names = "no-rx", "no-tx";
};
uart2: uart@b0070000 {
@@ -237,8 +238,8 @@
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
- sirf,uart-dma-rx-channel = <6>;
- sirf,uart-dma-tx-channel = <7>;
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ dma-names = "rx", "tx";
};
usp0: usp@b0080000 {
@@ -248,8 +249,8 @@
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
- sirf,usp-dma-rx-channel = <17>;
- sirf,usp-dma-tx-channel = <18>;
+ dmas = <&dmac1 1>, <&dmac1 2>;
+ dma-names = "rx", "tx";
};
usp1: usp@b0090000 {
@@ -259,8 +260,8 @@
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
- sirf,usp-dma-rx-channel = <14>;
- sirf,usp-dma-tx-channel = <15>;
+ dmas = <&dmac0 14>, <&dmac0 15>;
+ dma-names = "rx", "tx";
};
dmac0: dma-controller@b00b0000 {
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 0e21993..8582ae4 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -223,8 +223,8 @@
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
- sirf,uart-dma-rx-channel = <21>;
- sirf,uart-dma-tx-channel = <2>;
+ dmas = <&dmac1 5>, <&dmac0 2>;
+ dma-names = "rx", "tx";
};
uart1: uart@b0060000 {
@@ -243,8 +243,8 @@
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
- sirf,uart-dma-rx-channel = <6>;
- sirf,uart-dma-tx-channel = <7>;
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ dma-names = "rx", "tx";
};
usp0: usp@b0080000 {
@@ -254,8 +254,8 @@
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
- sirf,usp-dma-rx-channel = <17>;
- sirf,usp-dma-tx-channel = <18>;
+ dmas = <&dmac1 1>, <&dmac1 2>;
+ dma-names = "rx", "tx";
};
usp1: usp@b0090000 {
@@ -265,8 +265,8 @@
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
- sirf,usp-dma-rx-channel = <14>;
- sirf,usp-dma-tx-channel = <15>;
+ dmas = <&dmac0 14>, <&dmac0 15>;
+ dma-names = "rx", "tx";
};
usp2: usp@b00a0000 {
@@ -276,8 +276,8 @@
interrupts = <22>;
fifosize = <128>;
clocks = <&clks 30>;
- sirf,usp-dma-rx-channel = <10>;
- sirf,usp-dma-tx-channel = <11>;
+ dmas = <&dmac0 10>, <&dmac0 11>;
+ dma-names = "rx", "tx";
};
dmac0: dma-controller@b00b0000 {
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index b7bfe24..68b0fd4 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -24,7 +24,6 @@
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
-#include <linux/sirfsoc_dma.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -173,7 +172,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
+ if (sirfport->tx_dma_chan) {
if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
dmaengine_pause(sirfport->tx_dma_chan);
sirfport->tx_dma_state = TX_DMA_PAUSE;
@@ -288,7 +287,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
else {
sirfsoc_uart_pio_tx_chars(sirfport, 1);
@@ -310,7 +309,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+ if (sirfport->rx_dma_chan) {
if (!sirfport->is_marco)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
@@ -675,7 +674,7 @@ recv_char:
uart_handle_cts_change(port, cts_status);
wake_up_interruptible(&state->port.delta_msr_wait);
}
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+ if (sirfport->rx_dma_chan) {
if (intr_status & uint_st->sirfsoc_rx_timeout)
sirfsoc_uart_handle_rx_tmo(sirfport);
if (intr_status & uint_st->sirfsoc_rx_done)
@@ -686,7 +685,7 @@ recv_char:
SIRFSOC_UART_IO_RX_MAX_CNT);
}
if (intr_status & uint_st->sirfsoc_txfifo_empty) {
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
else {
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
@@ -778,7 +777,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+ if (sirfport->rx_dma_chan)
sirfsoc_uart_start_next_rx_dma(port);
else {
if (!sirfport->is_marco)
@@ -1014,11 +1013,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
SIRFSOC_USP_ASYNC_DIV2_OFFSET);
}
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
else
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+ if (sirfport->rx_dma_chan)
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
else
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
@@ -1049,93 +1048,6 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
clk_disable_unprepare(sirfport->clk);
}
-static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- dma_cap_mask_t dma_mask;
- struct dma_slave_config tx_slv_cfg = {
- .dst_maxburst = 2,
- };
-
- dma_cap_zero(dma_mask);
- dma_cap_set(DMA_SLAVE, dma_mask);
- sirfport->tx_dma_chan = dma_request_channel(dma_mask,
- (dma_filter_fn)sirfsoc_dma_filter_id,
- (void *)sirfport->tx_dma_no);
- if (!sirfport->tx_dma_chan) {
- dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
- sirfport->tx_dma_no);
- return -EPROBE_DEFER;
- }
- dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
-
- return 0;
-}
-
-static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- dma_cap_mask_t dma_mask;
- int ret;
- int i, j;
- struct dma_slave_config slv_cfg = {
- .src_maxburst = 2,
- };
-
- dma_cap_zero(dma_mask);
- dma_cap_set(DMA_SLAVE, dma_mask);
- sirfport->rx_dma_chan = dma_request_channel(dma_mask,
- (dma_filter_fn)sirfsoc_dma_filter_id,
- (void *)sirfport->rx_dma_no);
- if (!sirfport->rx_dma_chan) {
- dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
- sirfport->rx_dma_no);
- ret = -EPROBE_DEFER;
- goto request_err;
- }
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
- sirfport->rx_dma_items[i].xmit.buf =
- dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
- if (!sirfport->rx_dma_items[i].xmit.buf) {
- dev_err(port->dev, "Uart alloc bufa failed\n");
- ret = -ENOMEM;
- goto alloc_coherent_err;
- }
- sirfport->rx_dma_items[i].xmit.head =
- sirfport->rx_dma_items[i].xmit.tail = 0;
- }
- dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
-
- return 0;
-alloc_coherent_err:
- for (j = 0; j < i; j++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[j].xmit.buf,
- sirfport->rx_dma_items[j].dma_addr);
- dma_release_channel(sirfport->rx_dma_chan);
-request_err:
- return ret;
-}
-
-static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport)
-{
- dmaengine_terminate_all(sirfport->tx_dma_chan);
- dma_release_channel(sirfport->tx_dma_chan);
-}
-
-static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport)
-{
- int i;
- struct uart_port *port = &sirfport->port;
- dmaengine_terminate_all(sirfport->rx_dma_chan);
- dma_release_channel(sirfport->rx_dma_chan);
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[i].xmit.buf,
- sirfport->rx_dma_items[i].dma_addr);
-}
-
static int sirfsoc_uart_startup(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
@@ -1174,18 +1086,12 @@ static int sirfsoc_uart_startup(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
-
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
- ret = sirfsoc_uart_init_rx_dma(port);
- if (ret)
- goto init_rx_err;
+ if (sirfport->rx_dma_chan)
wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
- SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
- SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
- SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
- }
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
- sirfsoc_uart_init_tx_dma(port);
+ SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
+ SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
+ SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
+ if (sirfport->tx_dma_chan) {
sirfport->tx_dma_state = TX_DMA_IDLE;
wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
@@ -1232,12 +1138,8 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
gpio_set_value(sirfport->rts_gpio, 1);
free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
}
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
- sirfsoc_uart_uninit_rx_dma(sirfport);
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
- sirfsoc_uart_uninit_tx_dma(sirfport);
+ if (sirfport->tx_dma_chan)
sirfport->tx_dma_state = TX_DMA_IDLE;
- }
}
static const char *sirfsoc_uart_type(struct uart_port *port)
@@ -1313,8 +1215,8 @@ sirfsoc_uart_console_setup(struct console *co, char *options)
port->cons = co;
/* default console tx/rx transfer using io mode */
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
+ sirfport->rx_dma_chan = NULL;
+ sirfport->tx_dma_chan = NULL;
return uart_set_options(port, co, baud, parity, bits, flow);
}
@@ -1382,6 +1284,13 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
struct uart_port *port;
struct resource *res;
int ret;
+ int i, j;
+ struct dma_slave_config slv_cfg = {
+ .src_maxburst = 2,
+ };
+ struct dma_slave_config tx_slv_cfg = {
+ .dst_maxburst = 2,
+ };
const struct of_device_id *match;
match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
@@ -1402,27 +1311,10 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
"sirf,uart-has-rtscts");
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) {
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart"))
sirfport->uart_reg->uart_type = SIRF_REAL_UART;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,uart-dma-rx-channel",
- &sirfport->rx_dma_no))
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,uart-dma-tx-channel",
- &sirfport->tx_dma_no))
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
- }
if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
sirfport->uart_reg->uart_type = SIRF_USP_UART;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,usp-dma-rx-channel",
- &sirfport->rx_dma_no))
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,usp-dma-tx-channel",
- &sirfport->tx_dma_no))
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
if (!sirfport->hw_flow_ctrl)
goto usp_no_flow_control;
if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL))
@@ -1515,8 +1407,32 @@ usp_no_flow_control:
goto port_err;
}
- return 0;
+ sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
+ for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
+ sirfport->rx_dma_items[i].xmit.buf =
+ dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
+ if (!sirfport->rx_dma_items[i].xmit.buf) {
+ dev_err(port->dev, "Uart alloc bufa failed\n");
+ ret = -ENOMEM;
+ goto alloc_coherent_err;
+ }
+ sirfport->rx_dma_items[i].xmit.head =
+ sirfport->rx_dma_items[i].xmit.tail = 0;
+ }
+ if (sirfport->rx_dma_chan)
+ dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
+ sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
+ if (sirfport->tx_dma_chan)
+ dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
+ return 0;
+alloc_coherent_err:
+ for (j = 0; j < i; j++)
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items[j].xmit.buf,
+ sirfport->rx_dma_items[j].dma_addr);
+ dma_release_channel(sirfport->rx_dma_chan);
port_err:
clk_put(sirfport->clk);
err:
@@ -1529,6 +1445,19 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
struct uart_port *port = &sirfport->port;
clk_put(sirfport->clk);
uart_remove_one_port(&sirfsoc_uart_drv, port);
+ if (sirfport->rx_dma_chan) {
+ int i;
+ dmaengine_terminate_all(sirfport->rx_dma_chan);
+ dma_release_channel(sirfport->rx_dma_chan);
+ for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items[i].xmit.buf,
+ sirfport->rx_dma_items[i].dma_addr);
+ }
+ if (sirfport->tx_dma_chan) {
+ dmaengine_terminate_all(sirfport->tx_dma_chan);
+ dma_release_channel(sirfport->tx_dma_chan);
+ }
return 0;
}
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index b7d679c..8a6edda 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -392,9 +392,6 @@ struct sirfsoc_uart_register sirfsoc_uart = {
/* Indicate how many buffers used */
#define SIRFSOC_RX_LOOP_BUF_CNT 2
-/* Indicate if DMA channel valid */
-#define IS_DMA_CHAN_VALID(x) ((x) != -1)
-#define UNVALID_DMA_CHAN -1
/* For Fast Baud Rate Calculation */
struct sirfsoc_baudrate_to_regv {
unsigned int baud_rate;
@@ -423,8 +420,6 @@ struct sirfsoc_uart_port {
/* for SiRFmarco, there are SET/CLR for UART_INT_EN */
bool is_marco;
struct sirfsoc_uart_register *uart_reg;
- int rx_dma_no;
- int tx_dma_no;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
