Add lpuart dts node properties for eDMA support, them depend on the eDMA driver. See VF610_EDMA_MUXID0_UART*_*X macro on eDMA driver Signed-off-by: Yuan Yao <yao.yuan@xxxxxxxxxxxxx> --- arch/arm/boot/dts/vf610.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 365e0fa..ed6b053 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -118,6 +118,9 @@ interrupts = <0 61 0x00>; clocks = <&clks VF610_CLK_UART0>; clock-names = "ipg"; + dma-names = "lpuart-tx","lpuart-rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_UART0_TX>, + <&edma0 0 VF610_EDMA_MUXID0_UART0_RX>; status = "disabled"; }; @@ -127,6 +130,9 @@ interrupts = <0 62 0x04>; clocks = <&clks VF610_CLK_UART1>; clock-names = "ipg"; + dma-names = "lpuart-tx","lpuart-rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_UART1_TX>, + <&edma0 0 VF610_EDMA_MUXID0_UART1_RX>; status = "disabled"; }; @@ -136,6 +142,9 @@ interrupts = <0 63 0x04>; clocks = <&clks VF610_CLK_UART2>; clock-names = "ipg"; + dma-names = "lpuart-tx","lpuart-rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_UART2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_UART2_RX>; status = "disabled"; }; @@ -145,6 +154,9 @@ interrupts = <0 64 0x04>; clocks = <&clks VF610_CLK_UART3>; clock-names = "ipg"; + dma-names = "lpuart-tx","lpuart-rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_UART3_TX>, + <&edma0 0 VF610_EDMA_MUXID0_UART3_RX>; status = "disabled"; }; -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
