From: Qipan Li <Qipan.Li@xxxxxxx>
this patch provides PM entry of uart_ops, then drop clk enable and
disable because serial core will do it.
the patch also fixes the issue that uart hang in resume caused by
not-enabled clock.
Signed-off-by: Qipan Li <Qipan.Li@xxxxxxx>
Signed-off-by: Barry Song <Baohua.Song@xxxxxxx>
---
drivers/tty/serial/sirfsoc_uart.c | 14 +++++++++++---
1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 6fea79b..a6c38ab 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -1033,6 +1033,16 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
spin_unlock_irqrestore(&port->lock, flags);
}
+static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ if (!state)
+ clk_prepare_enable(sirfport->clk);
+ else
+ clk_disable_unprepare(sirfport->clk);
+}
+
static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
@@ -1264,6 +1274,7 @@ static struct uart_ops sirfsoc_uart_ops = {
.startup = sirfsoc_uart_startup,
.shutdown = sirfsoc_uart_shutdown,
.set_termios = sirfsoc_uart_set_termios,
+ .pm = sirfsoc_uart_pm,
.type = sirfsoc_uart_type,
.release_port = sirfsoc_uart_release_port,
.request_port = sirfsoc_uart_request_port,
@@ -1486,7 +1497,6 @@ usp_no_flow_control:
ret = PTR_ERR(sirfport->clk);
goto err;
}
- clk_prepare_enable(sirfport->clk);
port->uartclk = clk_get_rate(sirfport->clk);
port->ops = &sirfsoc_uart_ops;
@@ -1502,7 +1512,6 @@ usp_no_flow_control:
return 0;
port_err:
- clk_disable_unprepare(sirfport->clk);
clk_put(sirfport->clk);
err:
return ret;
@@ -1512,7 +1521,6 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
{
struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
struct uart_port *port = &sirfport->port;
- clk_disable_unprepare(sirfport->clk);
clk_put(sirfport->clk);
uart_remove_one_port(&sirfsoc_uart_drv, port);
return 0;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
