SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the
value specified in the datasheet. This is currently handled by a custom
baud rate calculation algorithm. The algorithm ID will be removed from
platform data, set the sampling rate directly instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 6 +++---
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 521a09e..079951b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -98,7 +98,7 @@ static struct plat_sci_port scif3_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.port_reg = SCIx_NOT_SUPPORTED,
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -121,7 +121,7 @@ static struct plat_sci_port scif4_platform_data = {
.port_reg = SCIx_NOT_SUPPORTED,
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -144,7 +144,7 @@ static struct plat_sci_port scif5_platform_data = {
.port_reg = SCIx_NOT_SUPPORTED,
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index fb0a237..59c3594 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -365,7 +365,7 @@ static struct plat_sci_port scif3_platform_data = {
.port_reg = SCIx_NOT_SUPPORTED,
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -388,7 +388,7 @@ static struct plat_sci_port scif4_platform_data = {
.port_reg = SCIx_NOT_SUPPORTED,
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -411,7 +411,7 @@ static struct plat_sci_port scif5_platform_data = {
.port_reg = SCIx_NOT_SUPPORTED,
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_3,
+ .sampling_rate = 8,
.type = PORT_SCIFA,
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
