The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-r8a7778.c | 36 ++++++++++++++++++----------------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 81701cf..676257e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -44,8 +44,8 @@
#include <asm/hardware/cache-l2x0.h>
/* SCIF */
-#define SCIF_INFO(baseaddr, irq) \
-{ \
+#define R8A7778_SCIF(index, baseaddr, irq) \
+static struct plat_sci_port scif##index##_platform_data = { \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
@@ -54,14 +54,17 @@
.irqs = SCIx_IRQ_MUXED(irq), \
}
-static struct plat_sci_port scif_platform_data[] __initdata = {
- SCIF_INFO(0xffe40000, gic_iid(0x66)),
- SCIF_INFO(0xffe41000, gic_iid(0x67)),
- SCIF_INFO(0xffe42000, gic_iid(0x68)),
- SCIF_INFO(0xffe43000, gic_iid(0x69)),
- SCIF_INFO(0xffe44000, gic_iid(0x6a)),
- SCIF_INFO(0xffe45000, gic_iid(0x6b)),
-};
+R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
+R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
+R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
+R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
+R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
+R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
+
+#define r8a7778_register_scif(index) \
+ platform_device_register_data(&platform_bus, "sh-sci", index, \
+ &scif##index##_platform_data, \
+ sizeof(scif##index##_platform_data))
/* TMU */
static struct resource sh_tmu0_resources[] __initdata = {
@@ -287,8 +290,6 @@ static void __init r8a7778_register_hspi(int id)
void __init r8a7778_add_dt_devices(void)
{
- int i;
-
#ifdef CONFIG_CACHE_L2X0
void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
if (base) {
@@ -300,11 +301,12 @@ void __init r8a7778_add_dt_devices(void)
}
#endif
- for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++)
- platform_device_register_data(&platform_bus, "sh-sci", i,
- &scif_platform_data[i],
- sizeof(struct plat_sci_port));
-
+ r8a7778_register_scif(0);
+ r8a7778_register_scif(1);
+ r8a7778_register_scif(2);
+ r8a7778_register_scif(3);
+ r8a7778_register_scif(4);
+ r8a7778_register_scif(5);
r8a7778_register_tmu(0);
r8a7778_register_tmu(1);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
