From: Qipan Li <Qipan.Li@xxxxxxx>
SiRFprimaII has three uart ports and three USP-based ports, so there
are totally six lines instead of five.
Signed-off-by: Qipan Li <Qipan.Li@xxxxxxx>
Signed-off-by: Barry Song <Baohua.Song@xxxxxxx>
---
drivers/tty/serial/sirfsoc_uart.c | 7 +++++++
drivers/tty/serial/sirfsoc_uart.h | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 37aa0dd..1231afe 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -96,6 +96,13 @@ static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
.line = 4,
},
},
+ [5] = {
+ .port = {
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 5,
+ },
+ },
};
static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index c43333d..fb8d0a0 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -365,7 +365,7 @@ struct sirfsoc_uart_register sirfsoc_uart = {
#define SIRFSOC_UART_MINOR 0
#define SIRFUART_PORT_NAME "sirfsoc-uart"
#define SIRFUART_MAP_SIZE 0x200
-#define SIRFSOC_UART_NR 5
+#define SIRFSOC_UART_NR 6
#define SIRFSOC_PORT_TYPE 0xa5
/* Baud Rate Calculation */
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
