On Tue, Jul 30, 2013 at 12:00:37PM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> On Tuesday 30 July 2013 11:08:59 Simon Horman wrote:
> > [ CC Greg Kroah-Hartman, linux-serial@xxxxxxxxxxxxxxx,
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx ]
> >
> > On Fri, Jul 26, 2013 at 04:22:02PM +0200, Laurent Pinchart wrote:
> > > Replace kzalloc and clk_get by their managed counterparts to simplify
> > > error and cleanup paths.
> >
> > Hi Laurent,
> >
> > I was recently asked for shmobile clocksource patches to be reviewed by the
> > clocksource maintainers.
>
> I suppose you mean serial port, not clock source.
>
> > I believe that means Greg Kroah-Hartman and linux-serial@xxxxxxxxxxxxxxx who
> > I have CCed on this email accordingly.
>
> linux-serial@xxxxxxxxxxxxxxx was already CC'ed in my original e-mail.
>
> > I have also CCed linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>
> Actually you haven't ;-)
:^)
> > as many moons ago I was asked for all patches that will go through my tree
> > and on to arm-soc to be sent there.
>
> This patch will likely go through the serial tree, which is why I hadn't CC'ed
> LAKML.
Understood, that makes sense.
> > > Signed-off-by: Laurent Pinchart
> > > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > ---
> > >
> > > drivers/tty/serial/8250/8250_em.c | 27 ++++++++-------------------
> > > 1 file changed, 8 insertions(+), 19 deletions(-)
> > >
> > > diff --git a/drivers/tty/serial/8250/8250_em.c
> > > b/drivers/tty/serial/8250/8250_em.c index 916cc19..5f3bba1 100644
> > > --- a/drivers/tty/serial/8250/8250_em.c
> > > +++ b/drivers/tty/serial/8250/8250_em.c
> > > @@ -95,25 +95,23 @@ static int serial8250_em_probe(struct platform_device
> > > *pdev)>
> > > struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ,
> > > 0);
> > > struct serial8250_em_priv *priv;
> > > struct uart_8250_port up;
> > > - int ret = -EINVAL;
> > > + int ret;
> > >
> > > if (!regs || !irq) {
> > > dev_err(&pdev->dev, "missing registers or irq\n");
> > > - goto err0;
> > > + return -EINVAL;
> > > }
> > >
> > > - priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > > if (!priv) {
> > > dev_err(&pdev->dev, "unable to allocate private data\n");
> > > - ret = -ENOMEM;
> > > - goto err0;
> > > + return -ENOMEM;
> > > }
> > >
> > > - priv->sclk = clk_get(&pdev->dev, "sclk");
> > > + priv->sclk = devm_clk_get(&pdev->dev, "sclk");
> > > if (IS_ERR(priv->sclk)) {
> > > dev_err(&pdev->dev, "unable to get clock\n");
> > > - ret = PTR_ERR(priv->sclk);
> > > - goto err1;
> > > + return PTR_ERR(priv->sclk);
> > > }
> > >
> > > memset(&up, 0, sizeof(up));
> > > @@ -136,20 +134,13 @@ static int serial8250_em_probe(struct
> > > platform_device *pdev)>
> > > ret = serial8250_register_8250_port(&up);
> > > if (ret < 0) {
> > > dev_err(&pdev->dev, "unable to register 8250 port\n");
> > > - goto err2;
> > > + clk_disable(priv->sclk);
> > > + return ret;
> > > }
> > >
> > > priv->line = ret;
> > > platform_set_drvdata(pdev, priv);
> > > return 0;
> > > -
> > > - err2:
> > > - clk_disable(priv->sclk);
> > > - clk_put(priv->sclk);
> > > - err1:
> > > - kfree(priv);
> > > - err0:
> > > - return ret;
> > > }
> > >
> > > static int serial8250_em_remove(struct platform_device *pdev)
> > >
> > > @@ -158,8 +149,6 @@ static int serial8250_em_remove(struct platform_device
> > > *pdev)>
> > > serial8250_unregister_port(priv->line);
> > > clk_disable(priv->sclk);
> > >
> > > - clk_put(priv->sclk);
> > > - kfree(priv);
> > >
> > > return 0;
> > >
> > > }
> --
> Regards,
>
> Laurent Pinchart
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
