- driver: remove use of nvidia,dma-request-selector
use dma_request_slave_channel to request channel
- if dmas/dma-names are missing, it still supports cpu based transfer
- update binding doc and specify dmas/dma-names properties as optional
Signed-off-by: Richard Zhao <rizhao@xxxxxxxxxx>
---
.../devicetree/bindings/spi/nvidia,tegra20-slink.txt | 10 +++++++---
drivers/spi/spi-tegra20-slink.c | 16 +++++-----------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index eefe15e..ae43bd1 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -4,8 +4,11 @@ Required properties:
- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
- reg: Should contain SLINK registers location and length.
- interrupts: Should contain SLINK interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this SLINK controller.
+
+Optional properties:
+- dmas : The Tegra DMA controller's phandle and request selector for
+ this SLINK controller.
+- dma-names : Should be "rx-tx".
Recommended properties:
- spi-max-frequency: Definition as per
@@ -17,7 +20,8 @@ spi@7000d600 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
- nvidia,dma-request-selector = <&apbdma 16>;
+ dmas = <&apbdma 16>;
+ dma-names = "rx-tx";
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 80490cc..278fb04 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -170,7 +170,7 @@ struct tegra_slink_data {
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
+ bool use_dma;
u32 spi_max_frequency;
u32 cur_speed;
@@ -629,11 +629,8 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
+ dma_chan = dma_request_slave_channel(tspi->dev, "rx-tx");
if (!dma_chan) {
dev_err(tspi->dev,
"Dma channel is not available, will try later\n");
@@ -648,7 +645,6 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1034,11 +1030,9 @@ static irqreturn_t tegra_slink_isr(int irq, void *context_data)
static void tegra_slink_parse_dt(struct tegra_slink_data *tspi)
{
struct device_node *np = tspi->dev->of_node;
- u32 of_dma[2];
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
+ if (of_find_property(np, "dmas", NULL))
+ tspi->use_dma = true;
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1132,7 +1126,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
+ if (tspi->use_dma) {
ret = tegra_slink_init_dma_param(tspi, true);
if (ret < 0) {
dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
