On 22/07/13 11:01, Rajendra Nayak wrote: > Boot on all OMAP2+ devices is broken with earlycon enabled > as discussed here [1] > > There were 2 issues which were rootcaused > 1. Issue caused due to hwmod doing a reset of console uart while > earlycon was using it (seen only on am335x devices) > > 2. omap serial causing a NULL context restore with context loss > count missing. > > This patch set attempts to fix both the issues and is one of the > different approaches discussed [1] on how to fix these issues. > > Boot tested on omap4 panda es with and without earlycon (DT boot) > Boot tested on am335x bone black with and without earlycon (DT boot) > Boot tested on OMAP3 beagle XM with and without earlycon (non-DT boot) > > [1] http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg91662.html > > Grygorii Strashko (1): > serial: omap: enable PM runtime only when its fully configured > > Rajendra Nayak (3): > ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL > ARM: OMAP2+: Avoid idling memory controllers with no drivers > ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device > state > > arch/arm/mach-omap2/omap_device.c | 18 ++++++++ > arch/arm/mach-omap2/omap_hwmod.h | 48 ++++++++++++++++++++ > arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 6 +-- > arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 +- > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 9 ++-- > arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 5 +- > arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 3 +- > arch/arm/mach-omap2/serial.c | 11 ----- > drivers/tty/serial/omap-serial.c | 3 +- > 9 files changed, 81 insertions(+), 24 deletions(-) This now fixes the boot hang for me so ... Tested-by: Mark Jackson <mpfj-list@xxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
