[PATCH] serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ttyTHS is consistent with the name used in driver.

Signed-off-by: Richard Zhao <rizhao@xxxxxxxxxx>
---
 drivers/tty/serial/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5e3d689..1456673 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -277,7 +277,7 @@ config SERIAL_TEGRA
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
-	  providing /dev/ttyHS0, 1, 2, 3 and 4 (note, some machines may not
+	  providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
 	  provide all of these ports, depending on how the serial port
 	  are enabled). This driver uses the APB DMA to achieve higher baudrate
 	  and better performance.
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux