On 2013-06-14, Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> wrote:
> On 06/12/2013 04:03 PM, Grant Edwards wrote:
>> I see the uart_ops.flush_buffer method which is used to flush the
>> UART's tx fifo (presumably when the user calls tcflush(TCOFLUSH)).
>>
>> How does the rx fifo get flushed when the user calls tcflush(TCIFLUSH)?
>
> It doesn't.
Thanks. I couldn't see any mechanism to do that, and I thought I must
be missing something.
> If you're seeing stale i/o, it's more likely due to the flip buffers
> not being flushed
Probably. There is a scenario where you can get old data because the
rx fifo isn't flushed, but I suspect it's not what my customer is
complaining about. FWIW, here's the scenario I'm worrying about:
1) Enable either RTS/CTS or Xon/Xoff flow control for a UART driver
that handles that flow control in hardware[1].
2) Stop making read() calls on the tty device.
3) The buffers in the tty layer fill up, so the uart driver stops
transferring data from the rx fifo to the tty layer.
4) The rx fifo fills up, and the flow control stops the other end
from sending data.
[all working OK up to this point, now you wait for an arbitrary
amount of time]
5) tcflush(TCIFLUSH) is called.
[data in the tty layer gets flushed, but old data in the rx
fifo remains]
6) Now that there's room for more rx data in the tty layer, the
uart driver resumes transferring (old) data from the rx fifo to
the tty layer.
7) read() is called and returns data that was received an arbitrary
amount of time before tcflush(TCIFLUSH) was called.
My "old" drivers that interfaced directly with the tty layer handled
this scenario, but those drivers were becoming unmaintainable because
of instability of the tty API over the range of kernel versions I
support. So, I converted them over to be "uart drivers" for the common
serial layer which has a much more stable API (and generally requires
much less code). Now I've got a customer complaining about not being
able to flush data, so I'm looking closer at how the tcflush() calls
are handled.
[1] Because of a bug in the serial-driver layer's handling of the
setting of Xon/Xoff characters by the settermios() call, it's not
possible to correctly use Xon/Xoff support in a UART for the case
where the user wants to use non-default Xon/Xoff characters.
--
Grant Edwards grant.b.edwards Yow! I feel ... JUGULAR ...
at
gmail.com
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
