The STiH416 is advanced HD AVC processor with 3D graphics acceleration
and 1.2-GHz ARM Cortex-A9 SMP CPU.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
CC: Stephen Gallimore <stephen.gallimore@xxxxxx>
CC: Stuart Menefy <stuart.menefy@xxxxxx>
CC: Arnd Bergmann <arnd@xxxxxxxx>
CC: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Documentation/arm/stixxxx/stih416-overview.txt | 12 +
arch/arm/boot/dts/stih416-clock.dtsi | 41 +++
arch/arm/boot/dts/stih416-pinctrl.dtsi | 377 ++++++++++++++++++++++++
arch/arm/boot/dts/stih416.dtsi | 111 +++++++
arch/arm/mach-stixxxx/board-dt.c | 3 +-
5 files changed, 543 insertions(+), 1 deletions(-)
create mode 100644 Documentation/arm/stixxxx/stih416-overview.txt
create mode 100644 arch/arm/boot/dts/stih416-clock.dtsi
create mode 100644 arch/arm/boot/dts/stih416-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stih416.dtsi
diff --git a/Documentation/arm/stixxxx/stih416-overview.txt b/Documentation/arm/stixxxx/stih416-overview.txt
new file mode 100644
index 0000000..e060867
--- /dev/null
+++ b/Documentation/arm/stixxxx/stih416-overview.txt
@@ -0,0 +1,12 @@
+ STiH416 Overview
+ ================
+
+Introduction
+------------
+
+ The STiH416 is the next generation of HD, AVC set-top box processors
+ for satellite, cable, terrestrial and IP-STB markets.
+
+ Features
+ - ARM Cortex-A9 1.2 GHz dual core CPU
+ - SATA2×2,USB 2.0×3, PCIe, Gbit Ethernet MAC×2
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
new file mode 100644
index 0000000..7026bf1
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-devel@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ clocks {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ CLK_SYSIN: CLK_SYSIN {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: arm_periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <600000000>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ CLK_S_ICN_REG_0: clockgenA0@4 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "CLK_S_ICN_REG_0";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
new file mode 100644
index 0000000..15843a9
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -0,0 +1,377 @@
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stixxxx-pincfg.h"
+/ {
+
+ aliases {
+ gpio0 = &PIO0;
+ gpio1 = &PIO1;
+ gpio2 = &PIO2;
+ gpio3 = &PIO3;
+ gpio4 = &PIO4;
+ gpio5 = &PIO40;
+ gpio6 = &PIO5;
+ gpio7 = &PIO6;
+ gpio8 = &PIO7;
+ gpio9 = &PIO8;
+ gpio10 = &PIO9;
+ gpio11 = &PIO10;
+ gpio12 = &PIO11;
+ gpio13 = &PIO12;
+ gpio14 = &PIO30;
+ gpio15 = &PIO31;
+ gpio16 = &PIO13;
+ gpio17 = &PIO14;
+ gpio18 = &PIO15;
+ gpio19 = &PIO16;
+ gpio20 = &PIO17;
+ gpio21 = &PIO18;
+ gpio22 = &PIO100;
+ gpio23 = &PIO101;
+ gpio24 = &PIO102;
+ gpio25 = &PIO103;
+ gpio26 = &PIO104;
+ gpio27 = &PIO105;
+ gpio28 = &PIO106;
+ gpio29 = &PIO107;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-pinctrl", "simple-bus";
+ st,retime-in-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,retime-out-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,syscfg = <&syscfg_sbc>;
+ st,syscfg-offsets = <0 40 50 60 100>;
+ ranges;
+ PIO0: pinctrl@fe610000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe610000 0x100>;
+ st,bank-name = "PIO0";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO1: pinctrl@fe611000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe611000 0x100>;
+ st,bank-name = "PIO1";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO2: pinctrl@fe612000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe612000 0x100>;
+ st,bank-name = "PIO2";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO3: pinctrl@fe613000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe613000 0x100>;
+ st,bank-name = "PIO3";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO4: pinctrl@fe614000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe614000 0x100>;
+ st,bank-name = "PIO4";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO40: pinctrl@fe615000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe615000 0x100>;
+ st,bank-name = "PIO40";
+ st,retime-pin-mask = <0x7f>;
+ };
+
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1 {
+ st,function = <ALT3>;
+ st,pins {
+ tx = <&PIO2 6 OUT>;
+ rx = <&PIO2 7 IN>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-pinctrl", "simple-bus";
+ st,retime-in-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,retime-out-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,syscfg = <&syscfg_front>;
+ st,syscfg-offsets = <0 40 50 60 100>;
+ ranges;
+
+ PIO5: pinctrl@fee00000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee00000 0x100>;
+ st,bank-name = "PIO5";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO6: pinctrl@fee01000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee01000 0x100>;
+ st,bank-name = "PIO6";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO7: pinctrl@fee02000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee02000 0x100>;
+ st,bank-name = "PIO7";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO8: pinctrl@fee03000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee03000 0x100>;
+ st,bank-name = "PIO8";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO9: pinctrl@fee04000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee04000 0x100>;
+ st,bank-name = "PIO9";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO10: pinctrl@fee05000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee05000 0x100>;
+ st,bank-name = "PIO10";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO11: pinctrl@fee06000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee06000 0x100>;
+ st,bank-name = "PIO11";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO12: pinctrl@fee07000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee07000 0x100>;
+ st,bank-name = "PIO12";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO30: pinctrl@fee08000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee08000 0x100>;
+ st,bank-name = "PIO30";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO31: pinctrl@fee09000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfee09000 0x100>;
+ st,bank-name = "PIO31";
+ st,retime-pin-mask = <0xff>;
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-pinctrl", "simple-bus";
+ st,retime-in-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,retime-out-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,syscfg = <&syscfg_rear>;
+ st,syscfg-offsets = <0 40 50 60 100>;
+ ranges;
+
+ PIO13: pinctrl@fe820000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe820000 0x100>;
+ st,bank-name = "PIO13";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO14: pinctrl@fe821000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe821000 0x100>;
+ st,bank-name = "PIO14";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO15: pinctrl@fe822000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe822000 0x100>;
+ st,bank-name = "PIO15";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO16: pinctrl@fe823000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe823000 0x100>;
+ st,bank-name = "PIO16";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO17: pinctrl@fe824000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe824000 0x100>;
+ st,bank-name = "PIO17";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO18: pinctrl@fe825000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfe825000 0x100>;
+ st,bank-name = "PIO18";
+ st,retime-pin-mask = <0xf>;
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,function = <ALT2>;
+ st,pins {
+ tx = <&PIO17 4 OUT>;
+ rx = <&PIO17 5 IN>;
+ output-enable = <&PIO11 3 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-fvdp-fe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-pinctrl", "simple-bus";
+ st,retime-in-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,retime-out-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,syscfg = <&syscfg_fvdp_fe>;
+ st,syscfg-offsets = <0 40 50 60 100>;
+ ranges;
+
+ PIO100: pinctrl@fd6b0000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd6b0000 0x100>;
+ st,bank-name = "PIO100";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO101: pinctrl@fd6b1000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd6b1000 0x100>;
+ st,bank-name = "PIO101";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO102: pinctrl@fd6b2000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd6b2000 0x100>;
+ st,bank-name = "PIO102";
+ st,retime-pin-mask = <0xff>;
+ };
+ };
+
+ pin-controller-fvdp-lite {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-pinctrl", "simple-bus";
+ st,retime-in-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,retime-out-delay = <0 300 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250>;
+ st,syscfg = <&syscfg_fvdp_lite>;
+ st,syscfg-offsets = <0 40 50 60 100>;
+ ranges;
+
+ PIO103: pinctrl@fd330000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd330000 0x100>;
+ st,bank-name = "PIO103";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO104: pinctrl@fd331000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd331000 0x100>;
+ st,bank-name = "PIO104";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO105: pinctrl@fd332000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd332000 0x100>;
+ st,bank-name = "PIO105";
+ st,retime-pin-mask = <0xff>;
+ };
+ PIO106: pinctrl@fd333000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd333000 0x100>;
+ st,bank-name = "PIO106";
+ st,retime-pin-mask = <0xff>;
+ };
+
+ PIO107: pinctrl@fd334000 {
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ gpio-controller;
+ reg = <0xfd334000 0x100>;
+ st,bank-name = "PIO107";
+ st,retime-pin-mask = <0xf>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
new file mode 100644
index 0000000..7dbe450
--- /dev/null
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih416-clock.dtsi"
+#include "stih416-pinctrl.dtsi"
+/ {
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffe2000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ syscfg_sbc:syscfg@fe600000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfe600000 0x1000>;
+ syscfg-range = <0 999>;
+ syscfg-name = "SYSCFG_SBC";
+ };
+ syscfg_front:syscfg@fee10000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfee10000 0x1000>;
+ syscfg-range = <1000 999>;
+ syscfg-name = "SYSCFG_FRONT";
+ };
+ syscfg_rear:syscfg@fe830000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfe830000 0x1000>;
+ syscfg-range = <2000 999>;
+ syscfg-name = "SYSCFG_REAR";
+ };
+
+ /* MPE */
+ syscfg_fvdp_fe:syscfg@fddf0000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfddf0000 0x1000>;
+ syscfg-range = <5000 999>;
+ syscfg-name = "SYSCFG_FVDP_FE";
+ };
+ syscfg_fvdp_lite:syscfg@fd6a0000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfd6a0000 0x1000>;
+ syscfg-range = <6000 999>;
+ syscfg-name = "SYSCFG_FVDP_LITE";
+ };
+
+ syscfg_cpu:syscfg@fdde0000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfdde0000 0x1000>;
+ syscfg-range = <7000 999>;
+ syscfg-name = "SYSCFG_CPU";
+ };
+
+ syscfg_compo:syscfg@fd320000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfd320000 0x1000>;
+ syscfg-range = <8000 999>;
+ syscfg-name = "SYSCFG_COMPO";
+ };
+
+ syscfg_transport:syscfg@fd690000{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfd690000 0x1000>;
+ syscfg-range = <9000 999>;
+ syscfg-name = "SYSCFG_TRANSPORT";
+ };
+
+ syscfg_lpm:syscfg@fe4b5100{
+ compatible = "st,stih416-syscfg";
+ reg = <0xfe4b5100 0x8>;
+ syscfg-range = <0 10>;
+ syscfg-name = "LPM_CFG_REGS";
+ };
+
+ serial2: serial@fed32000{
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfed32000 0x2c>;
+ interrupts = <0 197 0>;
+ clocks = <&CLK_S_ICN_REG_0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ };
+
+ /* SBC_UART1 */
+ sbc_serial1: serial@fe531000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfe531000 0x2c>;
+ interrupts = <0 210 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&CLK_SYSIN>;
+ };
+ };
+};
diff --git a/arch/arm/mach-stixxxx/board-dt.c b/arch/arm/mach-stixxxx/board-dt.c
index 52ce665..2b2552e 100644
--- a/arch/arm/mach-stixxxx/board-dt.c
+++ b/arch/arm/mach-stixxxx/board-dt.c
@@ -37,10 +37,11 @@ static void __init stih41x_timer_init(void)
static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
+ "st,stih416",
NULL
};
-DT_MACHINE_START(STM, "STiH415 SoC with Flattened Device Tree")
+DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
.init_time = stih41x_timer_init,
.smp = smp_ops(stixxxx_smp_ops),
.dt_compat = stih41x_dt_match,
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
