The uart works in the DCE mode by default, but sometime we need it
works at the DTE mode.
This patch adds the support for the DTE mode.
Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
---
.../bindings/tty/serial/fsl-imx-uart.txt | 3 +++
drivers/tty/serial/imx.c | 6 ++++++
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
index b462d0c..c662eb3 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -8,6 +8,8 @@ Required properties:
Optional properties:
- fsl,uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
+- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
+ is DCE mode by default.
Example:
@@ -16,4 +18,5 @@ serial@73fbc000 {
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
fsl,uart-has-rtscts;
+ fsl,dte-mode;
};
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 72bc1db..381a2d7 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -201,6 +201,7 @@ struct imx_port {
unsigned int old_status;
int txirq, rxirq, rtsirq;
unsigned int have_rtscts:1;
+ unsigned int dte_mode:1;
unsigned int use_irda:1;
unsigned int irda_inv_rx:1;
unsigned int irda_inv_tx:1;
@@ -1020,6 +1021,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
ufcr = readl(sport->port.membase + UFCR);
ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
+ if (sport->dte_mode)
+ ufcr |= UFCR_DCEDTE;
writel(ufcr, sport->port.membase + UFCR);
writel(num, sport->port.membase + UBIR);
@@ -1444,6 +1447,9 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "fsl,irda-mode", NULL))
sport->use_irda = 1;
+ if (of_get_property(np, "fsl,dte-mode", NULL))
+ sport->dte_mode = 1;
+
sport->devdata = of_id->data;
return 0;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
