On 05/14/2013 01:15 AM, Jongsung Kim wrote:
> Stephen Warren <swarren@xxxxxxxxxxxxx> :
>> For reference, the AMBA periphid of the UART device there is 0x00341011.
>> The nibble "3" is the revision being tested in:
>
> The UART device has periphid 0x00341011, and is compatible with the
> original PL011 prior to r1p5. Not with r1p5. It could be a possible
> way to specify the compatible periphid (such as 0x00241011) instead
> of just 0x0 when initializing the amba_device for the UART.
>
>>> +static unsigned int get_fifosize_arm(unsigned int periphid)
>>> +{
>>> + unsigned int rev = (periphid >> 20) & 0xf;
>>> + return rev < 3 ? 16 : 32;
>>> +}
...
> Doesn't the BCM2835 UART have anything different from the ARM PL011?
> What about the UARTPCellID registers? They are set to 0xb105f00d with
> the ARM PL011.
Looking at BCM2835-ARM-Peripherals.pdf (i.e. the public documentation
for the BCM2835 chip), I see:
=====
The UART provides:
* Separate 16x8 transmit and 16x12 receive FIFO memory.
...
For the in-depth UART overview, please, refer to the ARM PrimeCell UART
(PL011) Revision: r1p5 Technical Reference Manual.
=====
That seems to imply that not all r1p5 PL011s actually have a depth-32
FIFO. Perhaps this is a configurable property of the IP block, not
something that all r1p5 have?
I can't check the UARTPCellID registers right now.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
