Re: [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/12/2013 03:18 AM, Jongsung Kim wrote:
> The latest r1p5-revision of the ARM PL011 UART has 32-byte FIFOs, while all
> earlier ones have 16-byte FIFOs. This patch suggests a way to set the
> FIFO-size correctly & flexibly by using a
> function(vendor_data::get_fifosize) rather than using the
> vendor_data::fifosize variable. The function takes the UARTPeriphID, and
> returns the correct size.

This change (now part of 3.10-rc1) breaks the serial port on the BCM2835
ARM SoC (part of the Raspberry Pi). Sorry for not noticing this earlier;
a combination of my vacation and laziness I guess.

For reference, the AMBA periphid of the UART device there is 0x00341011.
The nibble "3" is the revision being tested in:

> +static unsigned int get_fifosize_arm(unsigned int periphid)
> +{
> +	unsigned int rev = (periphid >> 20) & 0xf;
> +	return rev < 3 ? 16 : 32;
> +}

Should that be <= not <, or is there just something more wrong in the
patch or bcm2835 HW? I wonder how r1p5 maps to 3 in the test above.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux