[PATCH 6/7] tty: of_serial: Add pinctrl support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use pinctrl to configure the SoCs pins directly from the driver.

Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/of_serial.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e7cae1c..e9f3289 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
@@ -57,6 +58,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 			struct of_serial_info *info)
 {
 	struct resource resource;
+	struct pinctrl *pinctrl;
 	struct device_node *np = ofdev->dev.of_node;
 	u32 clk, spd, prop;
 	int ret;
@@ -85,6 +87,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		goto out;
 	}
 
+	pinctrl = devm_pinctrl_get_select_default(&ofdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&ofdev->dev,
+			"pins are not configured from the driver\n");
+
 	spin_lock_init(&port->lock);
 	port->mapbase = resource.start;
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux