Trivial cleanup. This makes it easier to add different
methods to enumerate the device, for example ACPI 5.0
enumeration.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Jamie Iles <jamie@xxxxxxxxxxxxx>
Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_dw.c | 78 ++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 31 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e174901..d96e02e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -87,25 +87,51 @@ static int dw8250_handle_irq(struct uart_port *p)
return 0;
}
+static int dw8250_probe_of(struct uart_port *p)
+{
+ struct device_node *np = p->dev->of_node;
+ u32 val;
+
+ if (!of_property_read_u32(np, "reg-io-width", &val)) {
+ switch (val) {
+ case 1:
+ break;
+ case 4:
+ p->iotype = UPIO_MEM32;
+ p->serial_in = dw8250_serial_in32;
+ p->serial_out = dw8250_serial_out32;
+ break;
+ default:
+ dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
+ return -EINVAL;
+ }
+ }
+
+ if (!of_property_read_u32(np, "reg-shift", &val))
+ p->regshift = val;
+
+ if (of_property_read_u32(np, "clock-frequency", &val)) {
+ dev_err(p->dev, "no clock-frequency property set\n");
+ return -EINVAL;
+ }
+ p->uartclk = val;
+
+ return 0;
+}
+
static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- struct device_node *np = pdev->dev.of_node;
- u32 val;
struct dw8250_data *data;
+ int err;
if (!regs || !irq) {
dev_err(&pdev->dev, "no registers/irq defined\n");
return -EINVAL;
}
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- uart.port.private_data = data;
-
spin_lock_init(&uart.port.lock);
uart.port.mapbase = regs->start;
uart.port.irq = irq->start;
@@ -121,30 +147,20 @@ static int dw8250_probe(struct platform_device *pdev)
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
- if (!of_property_read_u32(np, "reg-io-width", &val)) {
- switch (val) {
- case 1:
- break;
- case 4:
- uart.port.iotype = UPIO_MEM32;
- uart.port.serial_in = dw8250_serial_in32;
- uart.port.serial_out = dw8250_serial_out32;
- break;
- default:
- dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
- val);
- return -EINVAL;
- }
+
+ if (pdev->dev.of_node) {
+ err = dw8250_probe_of(&uart.port);
+ if (err)
+ return err;
+ } else {
+ return -ENODEV;
}
- if (!of_property_read_u32(np, "reg-shift", &val))
- uart.port.regshift = val;
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- if (of_property_read_u32(np, "clock-frequency", &val)) {
- dev_err(&pdev->dev, "no clock-frequency property set\n");
- return -EINVAL;
- }
- uart.port.uartclk = val;
+ uart.port.private_data = data;
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
@@ -187,17 +203,17 @@ static int dw8250_resume(struct platform_device *pdev)
#define dw8250_resume NULL
#endif /* CONFIG_PM */
-static const struct of_device_id dw8250_match[] = {
+static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ /* Sentinel */ }
};
-MODULE_DEVICE_TABLE(of, dw8250_match);
+MODULE_DEVICE_TABLE(of, dw8250_of_match);
static struct platform_driver dw8250_platform_driver = {
.driver = {
.name = "dw-apb-uart",
.owner = THIS_MODULE,
- .of_match_table = dw8250_match,
+ .of_match_table = dw8250_of_match,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
