Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
Documentation/serial/driver | 39 +++++++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 8 ++++----
2 files changed, 43 insertions(+), 4 deletions(-)
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 0a25a91..c680678 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -133,6 +133,16 @@ hardware.
Interrupts: locally disabled.
This call must not sleep
+ send_xchar(port,ch)
+ Transmit a high priority character, even if the port is stopped.
+ This is used to implement XON/XOFF flow control and tcflow(). If
+ the serial driver does not implement this function, the tty core
+ will append the character to the circular buffer and then call
+ start_tx() / stop_tx() to flush the data out.
+
+ Locking: none.
+ Interrupts: caller dependent.
+
stop_rx(port)
Stop receiving characters; the port is in the process of
being closed.
@@ -255,6 +265,10 @@ hardware.
Locking: none.
Interrupts: caller dependent.
+ set_wake(port,state)
+ Enable/disable power management wakeup on serial activity. Not
+ currently implemented.
+
type(port)
Return a pointer to a string constant describing the specified
port, or return NULL, in which case the string 'unknown' is
@@ -307,6 +321,31 @@ hardware.
Locking: none.
Interrupts: caller dependent.
+ poll_init(port)
+ Called by kgdb to perform the minimal hardware initialization needed
+ to support poll_put_char() and poll_get_char(). Unlike ->startup()
+ this should not request interrupts.
+
+ Locking: tty_mutex and tty_port->mutex taken.
+ Interrupts: n/a.
+
+ poll_put_char(port,ch)
+ Called by kgdb to write a single character directly to the serial
+ port. It can and should block until there is space in the TX FIFO.
+
+ Locking: none.
+ Interrupts: caller dependent.
+ This call must not sleep
+
+ poll_get_char(port)
+ Called by kgdb to read a single character directly from the serial
+ port. If data is available, it should be returned; otherwise
+ the function should return NO_POLL_CHAR immediately.
+
+ Locking: none.
+ Interrupts: caller dependent.
+ This call must not sleep
+
Other functions
---------------
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c6690a2..ccfeab2 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -37,8 +37,8 @@ struct serial_struct;
struct device;
/*
- * This structure describes all the operations that can be
- * done on the physical hardware.
+ * This structure describes all the operations that can be done on the
+ * physical hardware. See Documentation/serial/driver for details.
*/
struct uart_ops {
unsigned int (*tx_empty)(struct uart_port *);
@@ -65,7 +65,7 @@ struct uart_ops {
/*
* Return a string describing the type of the port
*/
- const char *(*type)(struct uart_port *);
+ const char *(*type)(struct uart_port *);
/*
* Release IO and memory resources used by the port.
@@ -83,7 +83,7 @@ struct uart_ops {
int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct uart_port *);
- void (*poll_put_char)(struct uart_port *, unsigned char);
+ void (*poll_put_char)(struct uart_port *, unsigned char);
int (*poll_get_char)(struct uart_port *);
#endif
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
