On Mon, 30 Apr 2012 15:51:59 -0700 "H. Peter Anvin" <hpa@xxxxxxxxx> wrote: > On 04/30/2012 03:22 PM, NeilBrown wrote: > > > > What I would really like is to integrate it closely with the state > > of the UART. i.e. if the /dev/ttyO1 device is open, then the GPS > > is "on". If not then it is "off". Similarly if /dev/tty/O0 is > > open, bluetooth is "on", else "off". However I cannot find any way > > to "plug in" to the tty or serial drivers to perform an arbitrary > > action on first-open or last-close. Is something like that > > possible? If not, is it a reasonable thing to ask? Any suggests > > about where to put such a hook? > > > > I don't think that's the right interface. Just because the port is > currently open doesn't mean the device is active, nor vice versa. ALL > it means is that someone currently has an access handle to it. > > Since a serial port models, well, a *port*, it is logical to think of > a (hypothetical) socket containing an RS-232 connector as well as a > power outlet. Given that, it would be logical to drive the "power > connector" using the same type of interface used for the other parts > of an RS-232 control, meaning either with termios flags or via a > dedicated control ioctl (TIOCPOWER?). > > -hpa Hi Peter, I agree that in general there is not necessarily a 1-1 correspondence between "device file is open" and "device is powered", however I think that in a lot of real cases it is a very natural correspondence. In my bluetooth case, there is nothing useful that the device can do if hciattach isn't running and listening to the device, so it may as well be off. For GPS it is less clear as the GPS could maintain state (current almanac and ephemeris) and could even periodically tune in to the satellites and update this state (though as mine cannot power on/off the antenna that second case might not be very useful). This particular GPS device does not lose state when I toggle the 'on/off' line. It just stops sending information (and maybe stops doing calculations, I don't know). And that is exactly what I want to happen when the tty device is closed. I imagine this proposal as being like a virtual DTR line. It may not always be appropriate to connect DTR to the power switch, but sometimes it is. Thanks, NeilBrown
Attachment:
signature.asc
Description: PGP signature
