Re: [PATCH] serial: Fix wakeup init logic to speed up startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday, January 19, 2012, Simon Glass wrote:
> The synchronize_rcu() call resulting from making every serial driver
> wake-up capable (commit b3b708fa) slows boot down on my Tegra2x system
> (with CONFIG_PREEMPT disabled).
> 
> But this is avoidable since it is the device_set_wakeup_enable() and then
> subsequence disable which causes the delay. We might as well just make
> the device wakeup capable but not actually enable it for wakeup until
> needed.
> 
> Effectively the current code does this:
> 
> 	device_set_wakeup_capable(dev, 1);
> 	device_set_wakeup_enable(dev, 1);
> 	device_set_wakeup_enable(dev, 0);
> 
> We can just drop the last two lines.
> 
> Before this change my boot log says:
> [    0.227062] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [    0.702928] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra
> 
> after:
> [    0.227264] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [    0.227983] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra
> 
> for saving of 450ms.
> 
> Suggested-by: Rafael J. Wysocki <rjw@xxxxxxx>
> Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx>

Acked-by: Rafael J. Wysocki <rjw@xxxxxxx>

Thanks!

> ---
>  drivers/tty/serial/serial_core.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index c7bf31a..1305618 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
>  	 */
>  	tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
>  	if (likely(!IS_ERR(tty_dev))) {
> -		device_init_wakeup(tty_dev, 1);
> -		device_set_wakeup_enable(tty_dev, 0);
> -	} else
> +		device_set_wakeup_capable(tty_dev, 1);
> +	} else {
>  		printk(KERN_ERR "Cannot register tty device on line %d\n",
>  		       uport->line);
> +	}
>  
>  	/*
>  	 * Ensure UPF_DEAD is not set.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux