This makes the file checkpatch clean, fixing these warnings:
warning: drivers/tty/serial/8250.c,86: please, no space before tabs
warning: drivers/tty/serial/8250.c,345: please, no space before tabs
warning: drivers/tty/serial/8250.c,672: line over 80 characters
warning: drivers/tty/serial/8250.c,1070: line over 80 characters
warning: drivers/tty/serial/8250.c,1517: line over 80 characters
warning: drivers/tty/serial/8250.c,1519: line over 80 characters
warning: drivers/tty/serial/8250.c,2009: line over 80 characters
warning: drivers/tty/serial/8250.c,2023: line over 80 characters
warning: drivers/tty/serial/8250.c,2025: line over 80 characters
warning: drivers/tty/serial/8250.c,2230: line over 80 characters
error: drivers/tty/serial/8250.c,2252: code indent should use tabs where
possible
warning: drivers/tty/serial/8250.c,3056: line over 80 characters
warning: drivers/tty/serial/8250.c,3133: line over 80 characters
warning: drivers/tty/serial/8250.c,3337: EXPORT_SYMBOL(foo); should
immediately follow its function/variable
warning: drivers/tty/serial/8250.c,3338: EXPORT_SYMBOL(foo); should
immediately follow its function/variable
warning: drivers/tty/serial/8250.c,3348: line over 80 characters
This warning remains, since I am not sure how to fix it:
error: drivers/tty/serial/8250.c,2929: Macros with complex values should
be enclosed in parenthesis
I am not sure if trivial includes all of the above - please let me know.
Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx>
---
drivers/tty/serial/8250.c | 53 ++++++++++++++++++++++++++------------------
1 files changed, 31 insertions(+), 22 deletions(-)
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 9f50c4e..5e72f99 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -83,7 +83,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
#define PASS_LIMIT 512
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
@@ -342,7 +342,7 @@ static const u8
[UART_SCR] = 0x2c
},
regmap_out[8] = {
- [UART_TX] = 0x04,
+ [UART_TX] = 0x04,
[UART_IER] = 0x0c,
[UART_FCR] = 0x18,
[UART_LCR] = 0x1c,
@@ -669,7 +669,8 @@ static void disable_rsa(struct uart_8250_port *up)
result = !(mode & UART_RSA_MSR_FIFO);
if (!result) {
- serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ serial_outp(up, UART_RSA_MSR, mode
+ & ~UART_RSA_MSR_FIFO);
mode = serial_inp(up, UART_RSA_MSR);
result = !(mode & UART_RSA_MSR_FIFO);
}
@@ -865,7 +866,7 @@ static int broken_efr(struct uart_8250_port *up)
/*
* Exar ST16C2550 "A2" devices incorrectly detect as
* having an EFR, and report an ID of 0x0201. See
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
*/
if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
return 1;
@@ -1067,7 +1068,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
return;
DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
- serial_index(&up->port), up->port.iobase, up->port.membase);
+ serial_index(&up->port), up->port.iobase,
+ up->port.membase);
/*
* We really do need global IRQs disabled here - we're going to
@@ -1514,9 +1516,11 @@ unsigned int serial8250_modem_status(struct uart_8250_port *up)
if (status & UART_MSR_DDSR)
up->port.icount.dsr++;
if (status & UART_MSR_DDCD)
- uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ uart_handle_dcd_change(&up->port,
+ status & UART_MSR_DCD);
if (status & UART_MSR_DCTS)
- uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+ uart_handle_cts_change(&up->port,
+ status & UART_MSR_CTS);
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
@@ -2006,7 +2010,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
- printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ printk_ratelimited(KERN_INFO
+ "ttyS%d: LSR safety check engaged!\n",
serial_index(&up->port));
return -ENODEV;
}
@@ -2019,10 +2024,13 @@ static int serial8250_startup(struct uart_port *port)
serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
- serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+ fctr = serial_inp(up, UART_FCTR) &
+ ~(UART_FCTR_RX | UART_FCTR_TX);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD |
+ UART_FCTR_RX);
serial_outp(up, UART_TRG, UART_TRG_96);
- serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD |
+ UART_FCTR_TX);
serial_outp(up, UART_TRG, UART_TRG_96);
serial_outp(up, UART_LCR, 0);
@@ -2247,9 +2255,8 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
return quot;
}
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
@@ -2992,6 +2999,7 @@ void serial8250_suspend_port(int line)
{
uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
}
+EXPORT_SYMBOL(serial8250_suspend_port);
/**
* serial8250_resume_port - resume one serial port
@@ -3014,6 +3022,7 @@ void serial8250_resume_port(int line)
}
uart_resume_port(&serial8250_reg, &up->port);
}
+EXPORT_SYMBOL(serial8250_resume_port);
/*
* Register a set of serial devices attached to a platform device. The
@@ -3053,8 +3062,8 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
if (ret < 0) {
- dev_err(&dev->dev, "unable to register port at index %d "
- "(IO%lx MEM%llx IRQ%d): %d\n", i,
+ dev_err(&dev->dev, "unable to register port at "
+ "index %d (IO%lx MEM%llx IRQ%d): %d\n", i,
p->iobase, (unsigned long long)p->mapbase,
p->irq, ret);
}
@@ -3130,7 +3139,8 @@ static struct platform_device *serial8250_isa_devs;
*/
static DEFINE_MUTEX(serial_mutex);
-static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
+static struct uart_8250_port *serial8250_find_match_or_unused(
+ struct uart_port *port)
{
int i;
@@ -3334,9 +3344,6 @@ static void __exit serial8250_exit(void)
module_init(serial8250_init);
module_exit(serial8250_exit);
-EXPORT_SYMBOL(serial8250_suspend_port);
-EXPORT_SYMBOL(serial8250_resume_port);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
@@ -3345,10 +3352,12 @@ MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
" (unsafe)");
module_param(nr_uarts, uint, 0644);
-MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" \
+ __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
module_param(skip_txen_test, uint, 0644);
-MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+MODULE_PARM_DESC(skip_txen_test, \
+ "Skip checking for the TXEN bug at init time");
#ifdef CONFIG_SERIAL_8250_RSA
module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
