Here is the big tty/serial merge for 3.3.
Lots of good fixes and reworks by Jiri on the tty and serial drivers,
resolving some nasty issues, and a number of driver updates as well.
Full details are in the shortlog below.
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-next
All of these patches have been in the -mm and -next trees for a while.
thanks,
greg k-h
------------
Documentation/serial/driver | 2 +-
arch/powerpc/kernel/legacy_serial.c | 3 +
arch/x86/include/asm/mrst.h | 2 +-
arch/x86/kernel/early_printk.c | 2 +-
arch/x86/platform/mrst/early_printk_mrst.c | 16 +-
drivers/parport/parport_ax88796.c | 13 +-
drivers/parport/parport_sunbpp.c | 13 +-
drivers/tty/n_hdlc.c | 6 +-
drivers/tty/n_tty.c | 8 +-
drivers/tty/pty.c | 26 +-
drivers/tty/serial/8250.c | 98 ++---
drivers/tty/serial/8250.h | 26 +
drivers/tty/serial/8250_dw.c | 12 +-
drivers/tty/serial/8250_fsl.c | 63 +++
drivers/tty/serial/8250_pci.c | 47 ++-
drivers/tty/serial/Kconfig | 37 ++-
drivers/tty/serial/Makefile | 2 +
drivers/tty/serial/atmel_serial.c | 12 +-
drivers/tty/serial/bfin_sport_uart.c | 22 +-
drivers/tty/serial/bfin_sport_uart.h | 5 +-
drivers/tty/serial/bfin_uart.c | 83 ++--
drivers/tty/serial/ifx6x60.c | 1 -
drivers/tty/serial/imx.c | 148 +++++-
drivers/tty/serial/m32r_sio.c | 7 +-
drivers/tty/serial/max3100.c | 1 -
drivers/tty/serial/max3107-aava.c | 1 -
drivers/tty/serial/max3107.c | 1 -
drivers/tty/serial/mfd.c | 18 +-
drivers/tty/serial/mrst_max3110.c | 1 -
drivers/tty/serial/msm_serial_hs.c | 23 +-
drivers/tty/serial/mxs-auart.c | 5 +-
drivers/tty/serial/omap-serial.c | 2 +-
drivers/tty/serial/pch_uart.c | 160 ++++++-
drivers/tty/serial/sc26xx.c | 14 +-
drivers/tty/serial/serial_core.c | 325 +++++++-----
drivers/tty/serial/serial_cs.c | 8 +-
drivers/tty/serial/sirfsoc_uart.c | 783 ++++++++++++++++++++++++++++
drivers/tty/serial/sirfsoc_uart.h | 185 +++++++
drivers/tty/serial/timbuart.c | 15 +-
drivers/tty/serial/vr41xx_siu.c | 13 +-
drivers/tty/tty_io.c | 309 +++++++-----
drivers/tty/tty_ldisc.c | 22 +-
drivers/tty/vt/consolemap.c | 2 +-
include/linux/serial_8250.h | 5 +
include/linux/serial_core.h | 100 +---
45 files changed, 1989 insertions(+), 658 deletions(-)
create mode 100644 drivers/tty/serial/8250_fsl.c
create mode 100644 drivers/tty/serial/sirfsoc_uart.c
create mode 100644 drivers/tty/serial/sirfsoc_uart.h
---------------
Alexander Stein (1):
drivers/tty/serial/pch_uart.c: add console support
Axel Lin (2):
parport: convert drivers/parport/* to use module_platform_driver()
TTY: serial: convert drivers/tty/serial/* to use module_platform_driver()
Claudio Scordino (1):
atmel_serial: fix spinlock lockup in RS485 code
Dan Williams (2):
serial/8250_pci: setup-quirk workaround for the kt serial controller
serial/8250_pci: init-quirk msi support for kt serial controller
Dave Young (1):
tty_ldisc: remove unnecessary negative return check for wait_event_timeout
Dirk Behme (1):
imx: Add save/restore functions for UART control regs
Eric Miao (1):
tty: serial: imx: move del_timer_sync() to avoid potential deadlock
Fabio Estevam (1):
tty: serial: imx: Allow UART to be a source for wakeup
Ilya Zykov (1):
tty: n_hdlc not atomic use tty->flags.
Jiri Slaby (19):
TTY: move pgrp killing
TTY: extract /dev/tty handling from tty_open
TTY: extract driver lookup from tty_open
TTY: coalesce fail paths in tty_open
TTY: move tty_lookup_driver to switch-cases
TTY: move debug checking out of tty_release
TTY: open/release, cleanup printks
TTY: serial, cleanup include file
TTY: serial, cleanup atmel_set_ldisc
TTY: serial, switch closing_wait and close_delay to jiffies
TTY: serial, use tty_port_close_start helper
TTY: serial, document few functions
TTY: serial, do not touch tty->alt_speed
TTY: serial, inline uart_get
TTY: serial, define uart_port_activate/shutdown
TTY: serial, fill uart_port_shutdown
TTY: serial, extract uart_port_startup
TTY: pty, cleanup the pty counting
TTY: ldisc, remove some unneeded includes
Lars-Peter Clausen (1):
TTY: Remove redundant spi driver bus initialization
Maciej Szmigiero (1):
serial: fix serial_cs I/O windows for Argosy RS-COM 2P
Mayank Rana (2):
msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptr
msm_serial_hs: Fix spinlock recursion in handling CTS
Mika Westerberg (1):
serial, mfd: don't hardcode the console
Paul Gortmaker (8):
serial: move struct uart_8250_port from 8250.c to 8250.h
serial: clean up parameter passing for 8250 Rx IRQ handling
serial: export the key functions for an 8250 IRQ handler
serial: make 8250 timeout use the specified IRQ handler
serial: manually inline serial8250_handle_port
serial: add irq handler for Freescale 16550 errata.
serial: make FSL errata depend on 8250_CONSOLE, not just 8250
serial: driver for m32 arch should not have DEC alpha errata
Rong Wang (1):
UART: add CSR SiRFprimaII SoC on-chip uart drivers
Saleem Abdulrasool (1):
imx: add polled io uart methods
Shubhrajyoti D (2):
serial: OMAP2+: UART: Make the SERIAL_OMAP depend on ARCH_OMAP2PLUS
OMAP: UART: fix the return type of check_modem_status
Sonic Zhang (8):
serial: bfin-uart: Request CTS GPIO PIN when the serial device starts up.
serial: bfin-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control.
serial: bfin-uart: remove redundant CTS check for hardware CTS control.
tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled.
serial: bfin-sport-uart: Request CTS GPIO PIN when the sport emulated serial device starts up.
serial: bfin-sport-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control.
serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available.
serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS.
Thorsten Wißmann (1):
drivers/tty: Remove unneeded spaces
Uwe Kleine-König (6):
serial/imx: propagate error of platform_driver_register in init routine
serial/mxs-auart: only wake up tty layer once
serial: use DIV_ROUND_CLOSEST instead of open coding it
serial/documentation: fix documented name of DCD cpp symbol
serial/imx: propagate error from of_alias_get_id instead of using -ENODEV
serial/imx: let probing fail for the dt case without a valid alias
Wolfram Sang (1):
serial: 8250: replace hardcoded 0xbf with #define
Yegor Yefremov (1):
serial: add support for 400 and 800 v3 series Titan cards
Zeng Zhaoming (1):
tty: Fix memory leak in virtual console when enable unicode translation
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
