Re: [PATCH 1/3] ARM: omap_device: handle first time activation of console device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[...]
+static int omap_console_hwmod_enable(struct omap_device *od)
+{
+	console_lock();
+	/*
+	 * For early console we prevented hwmod reset and idle

A period is missing. Or maybe it should a comma with not capital letter.

+	 * So before we enable the uart clocks idle the console
+	 * uart clocks, then enable back the console uart hwmod.
+	 */
+	omap_hwmod_idle(od->hwmods[0]);
+	omap_hwmod_enable(od->hwmods[0]);

Why do we have to idle ->  enable? The module is already enabled, isn't it?
The comment is not super clear for me :-)
Is the goal is to reset the IP?

Yes, now that I read it, it does sound confusing. I should have at-least
read it once before I picked it from serial.c

But anyway, here's what the problem is.

I feel its partly to do with the inability of hwmod to handle some
modules which are left enabled post a setup, due to the
'HWMOD_INIT_NO_IDLE' flag set.
Such modules end up with a hwmod state as '_HWMOD_STATE_ENABLED' post
a setup. Now when a driver for such devices/modules tries to enable the
module the first time, hwmod throws up a big WARN stating the hwmod is
already in an enabled state.
[uart used as console is one such module, which cannot be idled post a
setup by hwmod]

If hwmod could be made in some way intelligent enough to know that the
module is in enabled state because of the 'HWMOD_INIT_NO_IDLE' itself,
a lot of this hackery might not be needed at all.
Simplest way to do it could be to just add another intermediate state,
something like  '_HWMOD_STATE_ENABLED_AT_INIT'.
I will post a patch for this, see if you like it being handled that way.

The other part of the problem is also with the inability to hook up
'custom' omap_device_pm_latency for omap devices created from DT.
Maybe a lot of such cases which need custom activate/deactivate
functions might have to be handled in some way in the framework
itself like the one above.

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux