On Sun, Jul 03, 2011 at 03:56:00PM +0800, Shawn Guo wrote:
> It adds device tree probe support for imx tty/serial driver.
>
> Signed-off-by: Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
> Signed-off-by: Jason Liu <jason.hui@xxxxxxxxxx>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> ---
> .../bindings/tty/serial/fsl-imx-uart.txt | 19 +++++
> drivers/tty/serial/imx.c | 82 +++++++++++++++++---
> 2 files changed, 91 insertions(+), 10 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>
> diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> new file mode 100644
> index 0000000..a9c0406
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> @@ -0,0 +1,19 @@
> +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
> +
> +Required properties:
> +- compatible : Should be "fsl,<soc>-uart"
> +- reg : Address and length of the register set for the device
> +- interrupts : Should contain uart interrupt
> +
> +Optional properties:
> +- fsl,uart-has-rtscts : Indicate the uart has rts and cts
> +- fsl,irda-mode : Indicate the uart supports irda mode
> +
> +Example:
> +
> +uart@73fbc000 {
> + compatible = "fsl,imx51-uart", "fsl,imx21-uart";
> + reg = <0x73fbc000 0x4000>;
> + interrupts = <31>;
> + fsl,uart-has-rtscts;
> +};
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 983f3bd..483c447 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -45,6 +45,8 @@
> #include <linux/delay.h>
> #include <linux/rational.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>
> #include <asm/io.h>
> #include <asm/irq.h>
> @@ -239,6 +241,12 @@ static struct platform_device_id imx_uart_devtype[] = {
> }
> };
>
> +static struct of_device_id imx_uart_dt_ids[] = {
> + { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
> + { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX2_UART], },
> + { /* sentinel */ },
> +};
Isn't this table a bit too small? What about the other SoCs?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
