On Mon, Dec 14, 2009 at 11:25:08AM +0200, Darius Augulis wrote: > hi community! > > can anybody ack this simple patch and merge it to 2.6.33-rc1 ? > I still waiting for this half year! > Perhaps AKPM can pick this up and add it to -mm. I've had him pick up similar patches from me before. I've added him to the CC list. Ira > On 12/05/2009 12:24 AM, Ira W. Snyder wrote: > > This patch is heavily based on an earlier patch found on the linux-serial > > mailing list [1], written by Darius Augulis. > > > > The previous incarnation of this patch only supported a 2x serial port > > card. I have added support for my SYBA 6x serial port card, and tested on > > x86. > > > > [1]: http://marc.info/?l=linux-serial&m=124975806304760 > > > > Signed-off-by: Ira W. Snyder<iws@xxxxxxxxxxxxxxxx> > > Cc: Darius Augulis<augulis.darius@xxxxxxxxx> > > Cc: linux-serial@xxxxxxxxxxxxxxx > > --- > > > > According to MAINTAINERS the 8250/16550 support currently lacks a > > maintainer. The earlier incarnation of this patch was posted all the way > > back in August. > > > > If necessary, I can post an incremental patch from the Darius' earlier > > patch. It would be great if someone could pick it up. I hate when new > > hardware doesn't work, especially something as simple as this. > > > > drivers/parport/parport_pc.c | 6 ++++++ > > drivers/serial/8250_pci.c | 22 +++++++++++++++++++++- > > include/linux/pci_ids.h | 1 + > > 3 files changed, 28 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c > > index 2597145..85204f0 100644 > > --- a/drivers/parport/parport_pc.c > > +++ b/drivers/parport/parport_pc.c > > @@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards { > > netmos_9805, > > netmos_9815, > > netmos_9901, > > + netmos_9865, > > quatech_sppxp100, > > }; > > > > @@ -2989,6 +2990,7 @@ static struct parport_pc_pci { > > /* netmos_9805 */ { 1, { { 0, -1 }, } }, > > /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, > > /* netmos_9901 */ { 1, { { 0, -1 }, } }, > > + /* netmos_9865 */ { 1, { { 0, -1 }, } }, > > /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, > > }; > > > > @@ -3092,6 +3094,10 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { > > PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, > > { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, > > 0xA000, 0x2000, 0, 0, netmos_9901 }, > > + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > > + 0xA000, 0x1000, 0, 0, netmos_9865 }, > > + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > > + 0xA000, 0x2000, 0, 0, netmos_9865 }, > > /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ > > { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, > > PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, > > diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c > > index b28af13..8b18c3c 100644 > > --- a/drivers/serial/8250_pci.c > > +++ b/drivers/serial/8250_pci.c > > @@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev) > > /* subdevice 0x00PS means<P> parallel,<S> serial */ > > unsigned int num_serial = dev->subsystem_device& 0xf; > > > > - if (dev->device == PCI_DEVICE_ID_NETMOS_9901) > > + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || > > + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) > > return 0; > > if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM&& > > dev->subsystem_device == 0x0299) > > @@ -1479,6 +1480,7 @@ enum pci_board_num_t { > > > > pbn_b0_bt_1_115200, > > pbn_b0_bt_2_115200, > > + pbn_b0_bt_4_115200, > > pbn_b0_bt_8_115200, > > > > pbn_b0_bt_1_460800, > > @@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { > > .base_baud = 115200, > > .uart_offset = 8, > > }, > > + [pbn_b0_bt_4_115200] = { > > + .flags = FL_BASE0|FL_BASE_BARS, > > + .num_ports = 4, > > + .base_baud = 115200, > > + .uart_offset = 8, > > + }, > > [pbn_b0_bt_8_115200] = { > > .flags = FL_BASE0|FL_BASE_BARS, > > .num_ports = 8, > > @@ -3649,6 +3657,18 @@ static struct pci_device_id serial_pci_tbl[] = { > > 0, 0, pbn_b0_1_115200 }, > > > > /* > > + * Best Connectivity PCI Multi I/O cards > > + */ > > + > > + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > > + 0xA000, 0x1000, > > + 0, 0, pbn_b0_1_115200 }, > > + > > + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > > + 0xA000, 0x3004, > > + 0, 0, pbn_b0_bt_4_115200 }, > > + > > + /* > > * These entries match devices with class COMMUNICATION_SERIAL, > > * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL > > */ > > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > > index 84cf1f3..b2c0bf3 100644 > > --- a/include/linux/pci_ids.h > > +++ b/include/linux/pci_ids.h > > @@ -2675,6 +2675,7 @@ > > #define PCI_DEVICE_ID_NETMOS_9835 0x9835 > > #define PCI_DEVICE_ID_NETMOS_9845 0x9845 > > #define PCI_DEVICE_ID_NETMOS_9855 0x9855 > > +#define PCI_DEVICE_ID_NETMOS_9865 0x9865 > > #define PCI_DEVICE_ID_NETMOS_9901 0x9901 > > > > #define PCI_VENDOR_ID_3COM_2 0xa727 > -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
