On Wed, 23 Sep 2009 03:33:58 +0530 Jaswinder Singh Rajput wrote: > > Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): No description found for parameter 'uport' > Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change' > Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): No description found for parameter 'uport' > Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change' > Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): No description found for parameter 'uport' > Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port' > Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): No description found for parameter 'uport' > Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port' > > Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@xxxxxxxxx> Ack. I've already sent the same patch. > --- > drivers/serial/serial_core.c | 4 ++-- > include/linux/serial_core.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c > index 2514d00..1689bda 100644 > --- a/drivers/serial/serial_core.c > +++ b/drivers/serial/serial_core.c > @@ -2426,7 +2426,7 @@ struct tty_driver *uart_console_device(struct console *co, int *index) > /** > * uart_add_one_port - attach a driver-defined port structure > * @drv: pointer to the uart low level driver structure for this port > - * @port: uart port structure to use for this port. > + * @uport: uart port structure to use for this port. > * > * This allows the driver to register its own uart_port structure > * with the core driver. The main purpose is to allow the low > @@ -2499,7 +2499,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) > /** > * uart_remove_one_port - detach a driver defined port structure > * @drv: pointer to the uart low level driver structure for this port > - * @port: uart port structure for this port > + * @uport: uart port structure for this port > * > * This unhooks (and hangs up) the specified port structure from the > * core driver. No further calls will be made to the low-level code > diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h > index d58e460..fe661af 100644 > --- a/include/linux/serial_core.h > +++ b/include/linux/serial_core.h > @@ -477,7 +477,7 @@ static inline int uart_handle_break(struct uart_port *port) > > /** > * uart_handle_dcd_change - handle a change of carrier detect state > - * @port: uart_port structure for the open port > + * @uport: uart_port structure for the open port > * @status: new carrier detect status, nonzero if active > */ > static inline void > @@ -503,7 +503,7 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status) > > /** > * uart_handle_cts_change - handle a change of clear-to-send state > - * @port: uart_port structure for the open port > + * @uport: uart_port structure for the open port > * @status: new clear to send status, nonzero if active > */ > static inline void > -- > 1.6.0.6 > > --- ~Randy -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
