[PATCH 23/30] icom: remove unused variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Breno Leitao <leitao@xxxxxxxxxxxxxxxxxx>

Signed-off-by: Breno Leitao <leitao@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
---

 drivers/serial/icom.c |   14 ++------------
 1 files changed, 2 insertions(+), 12 deletions(-)


diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 2b7531d..6579e2b 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1098,7 +1098,6 @@ static void icom_set_termios(struct uart_port *port,
 {
 	int baud;
 	unsigned cflag, iflag;
-	int bits;
 	char new_config2;
 	char new_config3 = 0;
 	char tmp_byte;
@@ -1119,34 +1118,27 @@ static void icom_set_termios(struct uart_port *port,
 	switch (cflag & CSIZE) {
 	case CS5:		/* 5 bits/char */
 		new_config2 |= ICOM_ACFG_5BPC;
-		bits = 7;
 		break;
 	case CS6:		/* 6 bits/char */
 		new_config2 |= ICOM_ACFG_6BPC;
-		bits = 8;
 		break;
 	case CS7:		/* 7 bits/char */
 		new_config2 |= ICOM_ACFG_7BPC;
-		bits = 9;
 		break;
 	case CS8:		/* 8 bits/char */
 		new_config2 |= ICOM_ACFG_8BPC;
-		bits = 10;
 		break;
 	default:
-		bits = 10;
 		break;
 	}
 	if (cflag & CSTOPB) {
 		/* 2 stop bits */
 		new_config2 |= ICOM_ACFG_2STOP_BIT;
-		bits++;
 	}
 	if (cflag & PARENB) {
 		/* parity bit enabled */
 		new_config2 |= ICOM_ACFG_PARITY_ENAB;
 		trace(ICOM_PORT, "PARENB", 0);
-		bits++;
 	}
 	if (cflag & PARODD) {
 		/* odd parity */
@@ -1322,7 +1314,6 @@ static struct uart_driver icom_uart_driver = {
 static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
 {
 	u32 subsystem_id = icom_adapter->subsystem_id;
-	int retval = 0;
 	int i;
 	struct icom_port *icom_port;
 
@@ -1368,7 +1359,7 @@ static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
 		}
 	}
 
-	return retval;
+	return 0;
 }
 
 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num)
@@ -1391,7 +1382,6 @@ static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
 {
 	struct icom_port *icom_port;
 	int port_num;
-	int retval;
 
 	for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) {
 
@@ -1405,7 +1395,7 @@ static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
 			icom_port->adapter = icom_adapter;
 
 			/* get port memory */
-			if ((retval = get_port_memory(icom_port)) != 0) {
+			if (get_port_memory(icom_port) != 0) {
 				dev_err(&icom_port->adapter->pci_dev->dev,
 					"Memory allocation for port FAILED\n");
 			}

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux