From: Chris Adams <cmadams@xxxxxxxxxx>
The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs). However, the alternate IDs were not loaded in the
combined product table. This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.
Signed-off-by: Chris Adams <cmadams@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
---
drivers/usb/serial/ti_usb_3410_5052.c | 44 ++++++++++++++++++++++-----------
1 files changed, 29 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 01d0c70..1cdb151 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -145,7 +145,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
__u8 mask, __u8 byte);
-static int ti_download_firmware(struct ti_device *tdev, int type);
+static int ti_download_firmware(struct ti_device *tdev);
/* circular buffer */
static struct circ_buf *ti_buf_alloc(void);
@@ -176,7 +176,7 @@ static unsigned int product_5052_count;
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
};
@@ -188,7 +188,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[] = {
+static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
@@ -304,21 +304,28 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
static int __init ti_init(void)
{
- int i, j;
+ int i, j, c;
int ret;
/* insert extra vendor and product ids */
+ c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
+ for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
ti_id_table_3410[j].idVendor = vendor_3410[i];
ti_id_table_3410[j].idProduct = product_3410[i];
ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ ti_id_table_combined[c].idVendor = vendor_3410[i];
+ ti_id_table_combined[c].idProduct = product_3410[i];
+ ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
}
j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
+ for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
ti_id_table_5052[j].idVendor = vendor_5052[i];
ti_id_table_5052[j].idProduct = product_5052[i];
ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ ti_id_table_combined[c].idVendor = vendor_5052[i];
+ ti_id_table_combined[c].idProduct = product_5052[i];
+ ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
}
ret = usb_serial_register(&ti_1port_device);
@@ -390,11 +397,7 @@ static int ti_startup(struct usb_serial *serial)
/* if we have only 1 configuration, download firmware */
if (dev->descriptor.bNumConfigurations == 1) {
- if (tdev->td_is_3410)
- status = ti_download_firmware(tdev, 3410);
- else
- status = ti_download_firmware(tdev, 5052);
- if (status)
+ if ((status = ti_download_firmware(tdev)) != 0)
goto free_tdev;
/* 3410 must be reset, 5052 resets itself */
@@ -1671,9 +1674,9 @@ static int ti_do_download(struct usb_device *dev, int pipe,
return status;
}
-static int ti_download_firmware(struct ti_device *tdev, int type)
+static int ti_download_firmware(struct ti_device *tdev)
{
- int status = -ENOMEM;
+ int status;
int buffer_size;
__u8 *buffer;
struct usb_device *dev = tdev->td_serial->dev;
@@ -1681,9 +1684,18 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
tdev->td_serial->port[0]->bulk_out_endpointAddress);
const struct firmware *fw_p;
char buf[32];
- sprintf(buf, "ti_usb-%d.bin", type);
- if (request_firmware(&fw_p, buf, &dev->dev)) {
+ /* try ID specific firmware first, then try generic firmware */
+ sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
+ dev->descriptor.idProduct);
+ if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
+ if (tdev->td_is_3410)
+ strcpy(buf, "ti_3410.fw");
+ else
+ strcpy(buf, "ti_5052.fw");
+ status = request_firmware(&fw_p, buf, &dev->dev);
+ }
+ if (status) {
dev_err(&dev->dev, "%s - firmware not found\n", __func__);
return -ENOENT;
}
@@ -1699,6 +1711,8 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
+ } else {
+ status = -ENOMEM;
}
release_firmware(fw_p);
if (status) {
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
