Add RTS/CTS-support for the PSC of the MPC5200B. Tested with a Phytec MPC5200B-IO. Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> --- arch/powerpc/include/asm/mpc52xx_psc.h | 11 +++++++- drivers/serial/mpc52xx_uart.c | 41 ++++++++++++++++++++++++++++--- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h index 8917ed6..a218da6 100644 --- a/arch/powerpc/include/asm/mpc52xx_psc.h +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -68,12 +68,20 @@ #define MPC52xx_PSC_IMR_ORERR 0x1000 #define MPC52xx_PSC_IMR_IPC 0x8000 -/* PSC input port change bit */ +/* PSC input port change bits */ #define MPC52xx_PSC_CTS 0x01 #define MPC52xx_PSC_DCD 0x02 #define MPC52xx_PSC_D_CTS 0x10 #define MPC52xx_PSC_D_DCD 0x20 +/* PSC acr bits */ +#define MPC52xx_PSC_IEC_CTS 0x01 +#define MPC52xx_PSC_IEC_DCD 0x02 + +/* PSC output port bits */ +#define MPC52xx_PSC_OP_RTS 0x01 +#define MPC52xx_PSC_OP_RES 0x02 + /* PSC mode fields */ #define MPC52xx_PSC_MODE_5_BITS 0x00 #define MPC52xx_PSC_MODE_6_BITS 0x01 @@ -91,6 +99,7 @@ #define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 #define MPC52xx_PSC_MODE_ONE_STOP 0x07 #define MPC52xx_PSC_MODE_TWO_STOP 0x0f +#define MPC52xx_PSC_MODE_TXCTS 0x10 #define MPC52xx_PSC_RFNUM_MASK 0x01ff diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3d..3234100 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -429,14 +429,24 @@ mpc52xx_uart_tx_empty(struct uart_port *port) static void mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Not implemented */ + if (mctrl & TIOCM_RTS) + out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); } static unsigned int mpc52xx_uart_get_mctrl(struct uart_port *port) { - /* Not implemented */ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + unsigned int ret = TIOCM_DSR; + u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + + if (!(status & MPC52xx_PSC_CTS)) + ret |= TIOCM_CTS; + if (!(status & MPC52xx_PSC_DCD)) + ret |= TIOCM_CAR; + + return ret; } static void @@ -479,7 +489,15 @@ mpc52xx_uart_stop_rx(struct uart_port *port) static void mpc52xx_uart_enable_ms(struct uart_port *port) { - /* Not implemented */ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); } static void @@ -580,6 +598,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, MPC52xx_PSC_MODE_ONE_STOP_5_BITS : MPC52xx_PSC_MODE_ONE_STOP; + if (new->c_cflag & CRTSCTS) { + mr1 |= MPC52xx_PSC_MODE_RXRTS; + mr2 |= MPC52xx_PSC_MODE_TXCTS; + } baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); @@ -617,6 +639,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, out_8(&psc->ctur, ctr >> 8); out_8(&psc->ctlr, ctr & 0xff); + if (UART_ENABLE_MS(port, new->c_cflag)) + mpc52xx_uart_enable_ms(port); + /* Reenable TX & RX */ out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); @@ -826,6 +851,7 @@ mpc52xx_uart_int(int irq, void *dev_id) struct uart_port *port = dev_id; unsigned long pass = ISR_PASS_LIMIT; unsigned int keepgoing; + u8 status; spin_lock(&port->lock); @@ -842,6 +868,13 @@ mpc52xx_uart_int(int irq, void *dev_id) if (psc_ops->tx_rdy(port)) keepgoing |= mpc52xx_uart_int_tx_chars(port); + status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + if (status & MPC52xx_PSC_D_DCD) + uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); + + if (status & MPC52xx_PSC_D_CTS) + uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); + /* Limit number of iteration */ if (!(--pass)) keepgoing = 0; -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html