2007/3/8, Russell King <rmk+lkml@xxxxxxxxxxxxxxxx>:
On Thu, Mar 08, 2007 at 08:44:31AM -0500, Robin Getz wrote: > On Wed 7 Mar 2007 16:30, Oleksiy Kebkal pondered: > > 2007/3/7, Robin Getz <rgetz@xxxxxxxxxxxxxxxxxxxx>: > > > Right - so the question is where to manage the default state? I was > > > thinking in the resource might be a good idea, but there isn't really a > > > good place for it. (You could re-use some bits if flags, but I think that > > > would not be a good idea). > > > > /proc/tty/driver/uartN/settings? > > > > That would let you change things are run time, but the problem is at boot > time. A default setting needs to be set, so when things initialize, and proc > does not exist yet, it is still set properly... I disagree. "proc does not exist yet" - the only time that applies is long before userspace as active. As I've said already, having a console on the same port as your application program is just asking for trouble. All bets are off - the kernel _will_ corrupt your data stream in random places. Don't do it - it will _NEVER_ be reliable. Never, ever, mix kernel consoles with application serial ports. -- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
-- EvoLogics GmbH Blumenstraße 49, 10243 Berlin F&E Labor Bionik Ackerstraße 76, 13355 Berlin Tel.: + 49- (0) 30- 46 06 82 26 Fax: + 49- (0) 30- 46 06 82 15 lesha@xxxxxxxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html